View E3X-NA14V_1411989.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

digital fiber optic & laser optic sensor guide offering unsurpassed sensing solutions general purpose, standard detection requirements special beam, non-standard requirements application specifc requirements e32 series fiber units amplifer units e3x-da-s/-mda series e3x-dac-s true color series e3x-na/-sd series
contents fiber unit overview standard models flexible (new standard)........................................................................................ ......... 3 standard ...................................................................................................................... .. 4 break-resistant............................................................................................................... 4 fluorine coated ............................................................................................................. 5 environmental resistive models heat-resistant.................................................................................. ............................... 6 chemical-resistant ......................................................................................................... 6 vacuum-resistant ........................................................................................................... 7 application-specific models liquid-level detection............................................................................. ........................ 8 ordering information through-beam fiber units .................................................................................. ........... 9 reflective fiber units................................................................................................... 14 accessories.................................................................................................................. 1 7 ratings/characteristics ....................................................................................................... .............................. 21 dimensions through-beam fiber units ........................................................................................... 2 2 reflective fiber units................................................................................................... 25 application-specific fiber units.................................................................................... 27 accessories.................................................................................................................. 2 9 precautions ................................................................................................................... .................. 31 amplifier overview ratings/characteristics e3x-sd simple fiber optic amplifiers with digital display.......................................... 34 e3x-na simple fiber optic amplifiers with bar graph display ................................... 34 e3x-da-s dual display fiber optic amplifiers ............................................................ 36 e3x-mda two-channel dual display digital fiber optic amplifiers ............................ 38 e3x-dac-s true color fiber optic amplifiers with digital dual display ..................... 40 accessories ................................................................................................................... .................. 42 dimensions .................................................................................................................... ................. 46
2 screw-shaped cylindrical flat equipped with sleeve fiber unit solutions for general-purpose applications these fibers units can be used in a variety of applications, such as detecting the presence of workpieces and positioning. a wide variety of shapes for adapting to different installation locations choose the model that suits the installation space from a wide variety of shapes and sizes (7 shapes, in standard or small sizes). flexible, pliable fiber that can be handled like wire we have developed a broad range of fbers to meet a wide variety of needs. multicore (fexible) fber is a new type of standard fber that can be used like wire without worrying about the bending radius. we have also produced fber that will not break when used in moving parts and fber that is not degraded by contact with oil. flat models flat models that allow simple screw mounting and straightforward wiring have been added to the lineup. using these models eliminates the problem of fbers getting caught on surrounding objects . saving energy and work we will produce fber of the required length (in meter units). for large-scale installations, specifcations of up to 20 m can be handled. (specifcations of 0.3 m and 0.5 m are also possible.) custom-produced sleeves models with sleeves allow detection in tight spaces. we will perform the time- consuming task of fashioning the sleeve, with a length and bends to suit the space (except for ultrafne sleeves). flat model bendable sus304 sleeves conventional fber you will certainly appreciate the ease of use that fexible fber ensures. flexible fber space savings and simple mounting length can be specifed in 1-m units detect workpieces in tight spaces standard models omrons fbers marked with this symbol let you customize the length and eliminate excess fber for a tidy, safe installation. cut to length in the field
3 detection with increased reliability a variety of heads incorporating the latest optical technology makes it possible to solve common problems related to detection and to increase reliability. ? resistant to dust and dirt ? capable of detecting small workpieces ? resistant to workpiece vibration use these models to handle unstable detection conditions. fiber units for the food-packaging, semiconductor, and solar industries these models, which were developed for specifc applications, offer top-quality detection performance. ? label detection ? liquid-level detection ? alignment and mapping of glass substrates ? wafer mapping ? true color detection ? distance measurement use these models for specifc applications. high resistance to external conditions with fiber we have developed model variations for adapting to a variety of environmental conditions. these models enable detection in high-temperature environments and vacuums. ? high-temperature environments ? environments subject to the splattering of chemicals ? vacuums use these models to handle applications in special environments. small-spot models e32-c42+ e39-f3a label-detection models e32-g14 heat-resistant models limited-refective models e32-l24l area-sensing models e32-t16j alignment-check models e32-l16 liquid-level detection models e32-d36t chemical-resistant models area-sensing models e32-t16j special-beam models application-specifc models environment-resistive models
4 standard models features/applications flexible (new standard) ?? ? perform ? wiring ? without ? worrying ? about ? the ? bending ? radius. ?? ? choose ? the ? model ? to ? suit ? the ? installation ? space ? from ? a ? variety ? of ? shapes. ? flexible ? fber ? conventional ? fber fewer ? problems ? ?? light ? intensity ? affected ? by ? bends ? in ? fber ? fiber ? broken ? by ? getting ? caught ? on ? surrounding ? objects feature: multicore (flexible) fibers cores ? cladding ? a ? large ? number ? of ? ultrafne ? cores ? are ? all ? surrounded ? by ? cladding. ? as ? a ? result, ? the ? fber ? is ? fexible ? and ? can ? be ? bent ? without ? signifcantly ? reducing ? the ? light ? intensity. ? this ? helps ? solve ? problems, ? such ? as ? fber ? being ? broken ? by ? getting ? caught ? on ? other ? objects. ? ratings/characteristics min. ? sensing ? object 0.005-mm ? dia. min. ? bending ? radius 1 ? mm ambient ? temperature C40c ? to ? 70c ? (no ? icing ? or ? condensation) fiber ? material plastic ? standard ?? ? choose ? the ? model ? to ? suit ? the ? installation ? space ? from ? a ? variety ? of ? shapes. ? ?? ? new ? fat ? models ? allow ? space ? savings ? and ? simple ? installation. screw-shaped right-angle screw-shaped equipped ? with ? sleeve cylindrical flat feature: flat models flat ? models, ? which ? allow ? simple ? attachment ? and ? wiring, ? have ? been ? added ? to ? the ? lineup. ? choose ? the ? model ? to ? suit ? the ? installation ? space ? from ? 3 ? sensing ? directions ? and ? 2 ? sizes, ? standard ? and ? small. ? ratings/characteristics min. ? sensing ? object 0.005-mm ? dia. min. ? bending ? radius 10 ? or ? 25 ? mm* ambient ? temperature C40c ? to ? 70c ? (no ? icing ? or ? condensation) fiber ? material plastic ? * ? depends ? on ? the ? fber ? diameter. break-resistant ?? ? bundle-fber ? models ? can ? be ? used ? for ? moving ? parts. ? ?? ? capable ? of ? withstanding ? at ? least ? one ? million ? repeated ? bends ? (in ? typical ? applications). ? feature: bundle fibers the ? fiber ? units ? contain ? a ? large ? number ? of ? independent ? fne ? fbers, ? ensuring ? a ? high ? degree ? of ? fexibility. ? ratings/characteristics min. ? sensing ? object 0.005-mm ? dia. min. ? bending ? radius 4 ? mm ? (withstands ? repeated ? bending) ambient ? temperature C40c ? to ? 70c ? (no ? icing ? or ? condensation) fiber ? material plastic ? r : flexible fber b : bendable fber
features/applications 5 standard models model number used when changing the sleeve length and bends total length l1 r total length l2 r model numbers incorporating the bending radius, r, and dimensions l1 and l2 ?? ? fiber ? degradation ? due ? to ? oil ? is ? prevented ? using ? a ? fuororesin coating. ?? ? free ? cutting ? is ? possible ? with ? cutter ? provided. ? fluorine coating feature: fluorine coating (cross section) fluororesin coating fluororesin is used as the sheath material to prevent fber degradation resulting from oil adhesion. note: the tip of the head is not chemical-resistant. ratings/characteristics min. sensing object 0.005-mm dia. min. bending radius 4 mm ambient temperature C40c to 70c (no icing or condensation) fiber material plastic oil is blocked! fiber customization service (fiber length, sleeve length, and bends) fiber length applicable models standard models model number used for ordering standard model number + fiber length fiber length: 0.3 m, 0.5 m, or any length from 1 to 20 m (in 1-m units) sleeve length and bends this customization/delivery service applies to standard models. ? it ? is ? aimed ? at ? reducing ? industrial ? waste ? and simplifying the installation procedure. fiber length vs. sensing distance through-beam fiber units e32-tc200b/e32-tc200f (fiber length of 2 m corresponds to 100%.) fiber ? units ? with refective sensors e32-dc200b/e32-dc200f (fiber length of 2 m corresponds to 100%.) sensing distance (%) 100 80 60 40 20 0 2 5 10 15 20 fiber length (m) sensing distance (%) 100 80 60 40 20 0 2 5 10 15 20 fiber length (m) model number used when changing only the sleeve length l model: e32- *1 c200 *2 -s *3 specifying l2 only (units: mm) bending radius l2 (1) model number r5 5 e32- *1 c200 *2 -s *3 a3 10 e32- *1 c200 *2 -s *3 a4 r7.5 7.5 e32- *1 c200 *2 -s *3 b3 17.5 e32- *1 c200 *2 -s *3 b4 r10 10 e32- *1 c200 *2 -s *3 c3 20 e32- *1 c200 *2 -s *3 c4 r12.5 12.5 e32- *1 c200 *2 -s *3 d3 22.5 e32- *1 c200 *2 -s *3 d4 u : fluorine-coated fber *1: ? insert ? t ? for ? through-beam ? fiber ? units ? and ? d ? for ? fiber ? units ? with ? refective sensors. *2: insert the b or f that appears at the end of the original model number. *3: insert 50 if the total length is 50 mm. the total length must not exceed 120 mm. specifying l1 only (units: mm) bending radius l1 (1) model number r5 10 e32- *1 c200 *2 -s *3 a1 15 e32- *1 c200 *2 -s *3 a2 r7.5 12.5 e32- *1 c200 *2 -s *3 b1 17.5 e32- *1 c200 *2 -s *3 b2 r10 15 e32- *1 c200 *2 -s *3 c1 20 e32- *1 c200 *2 -s *3 c2 r12.5 17.5 e32- *1 c200 *2 -s *3 d1 22.5 e32- *1 c200 *2 -s *3 d2
6 features/applications *the ? sensing ? distances ? apply ? for ? use ? in ? combination ? with ? the ? e3x-da-s ? amplifer ? unit ? (general-purpose, ? standard ? mode). ? environment-resistive ? models ?? ? built-in ? lens ? and ? high-power ? beam ? reduce ? the ? infuence ? of ? dirt ? and ? drops ? of ? water. ? ?? ? round ? design ? prevents ? drops ? of ? water ? sticking ? to ? the ? head ? (e32-t11f). ? overview ? of ? model ? variations type features shape, ? sensing ? distance ? (mm)* model ? number through-beam water-resistant ? round ? head 2,000 e32-t11f built-in ? lens, ? high ? power 3,000 e32-t12f heat-resistant ? up ? to ? 200c 700 e32-t81f-s refective built-in ? lens, ? high ? power 95 e32-d12f overview ? of ? model ? variations type ambient ? temperature features shape, ? sensing ? distance ? (mm)* model ? number through-beam C40c ? to ? 150c m4 screw 760 e32-t51 C40c ? to ? 200c l-shaped, ? long ? distance 1,300 e32-t84s-s C60c ? to ? 350c m4 screw 450 e32-t61-s refective C60c ? to ? 350c m6 screw 90 e32-d61-s C40c ? to ? 400c m6 ? screw, ? with ? sleeve 60 e32-d73-s heat-resistant applications detecting ? wafers ? in ? high-temperature ? environments ? ratings/characteristics 150c ? models 200c ? and ? higher ? models e32-t81r e32-d81r all ? other ? models min. ? bending ? radius 35 ? mm 10 ? mm 25 ? mm fiber ? material plastic ? (fuororesin ? coating) glass (fuoroesin ? coating) glass ? (sus ? spiral ? coating) e32-t61-s ?? ? these ? fiber ? units ? can ? be ? used ? for ? various ? applications ? in ? temperatures ? up ? to ? 400c. ? e32-t84s-s chemical-resistant applications detecting ? workpieces ? in ? cleaning ? processes ? ratings/characteristics all ? other ? models e32-t51f e32-t81f-s ambient ? temperature C40c ? to ? 70c C40c ? to ? 150c C40c ? to ? 200c fiber ? material plastic ? (fuororesin ? coating) glass ? (fuororesin ? coating) e32-t12f e32-t14f
features/applications 7 *the ? sensing ? distances ? apply ? for ? use ? in ? combination ? with ? the ? e3x-da-s ? amplifer ? unit ? (general-purpose, ? standard ? mode). ? environment-resistive ? models overview ? of ? model ? variations type features shape, ? sensing ? distance ? (mm)* model ? number through-beam m4 ? screw, ? top-view, ? heat-resistant ? up ? to ? 120c, ? long ? distance ? 1,000 e32-t51v ? 1m+ e39-f1v l-shaped, ? heat-resistant ? up ? to ? 120c ? 130 e32-t54v ? 1m l-shaped, ? long ? distance, ? heat-resistant ? up ? to ? 200c ? 480 e32-t84sv ? 1m fiber ? units ? on ? atmospheric-pressure ? side appearance type model ? number common e32-t10v ? 2m flanges appearance type model ? number 4-channel ? fange e32-vf4 1-channel ? fange e32-vf1 ratings/characteristics number ? of ? channels 4 ? channels 1 ? channel item model ? number e32-vf4 e32-vf1 leakage ? rate 110 -10 ? pam 3 /s ? max. ? ambient ? temperature operating: ? ?25c ? to ? 55c ? storage: ? ?25c ? to ? 55c ? material aluminum ? (a5056) ? stainless ? steel ? (sus304) ? aluminum ? (a5056) flange-seal ? material fluorocarbon ? rubber ? (viton) weight ? (packed ? state) approx. ? 280 ? g approx. ? 240 ? g vacuum-resistant ?? ? these ? models ? can ? be ? used ? in ? high-vacuum ? environments ? at ? pressures ? from ? 10 -5 ? to ? 0.1 ? pa. ?? ? the ? 4-channel ? multi-fange, ? which ? has ? a ? maximum ? leakage ? rate ? of ? 110 -10 ? pam 3 /s, ? contributes ? to ? space ? savings. ? applications ? (confguration ? example) ratings/characteristics 120c ? models 200c ? models atmospheric- pressure side min. ? bending ? radius 30 ? mm 25 ? mm fiber ? material glass (fuororesin ? coating) glass ? (sus ? spiral ? coating) plastic ? (fuororesin ? coating) lens ? unit e39-f1v vacuum ? chamber vacuum ? side atmospheric-pressure ? side flange e32-vf4 ? (4 c h ) e32-vf1 ? (1 c h ) fiber ? unit ? on ? vacuum ? side ? (set ? of ? 2) e32-t51v e32-t54v e32-t84sv fiber ? units ? on ? atmospheric- pressure ? side ? (set ? of ? 2) e32-t10v amplifer ? unit e3x-da-s e3x-na
8 features/applications *the ? sensing ? distances ? apply ? for ? use ? in ? combination ? with ? the ? e3x-da-s ? amplifer ? unit ? (general-purpose, ? standard ? mode). ? application-specifc models overview ? of ? model ? variations type features shape, ? sensing ? distance ? (mm)* model ? number through-beam slot ? sensor, ? no ? adjustment ? of ? optical ? axis ? required 10 e32-g14 screw ? mounting, ? side-view 3,400 e32-t14 overview ? of ? model ? variations type features shape, ? sensing ? distance ? (mm)* model ? number through-beam light ? on ? when ? liquid ? is ? present ? (ideal ? for ? checking ? lower ? limits) ? applicable ? tube: ? transparent ? tube ? with ? a ? diameter ? of ? 3.2, ? 6.4, ? or ? 9.5 ? mm ? and ? a ? recommended ? wall ? thickness ? of ? 1 ? mm e32-a01 light ? on ? when ? liquid ? is ? absent ? (ideal ? for ? checking ? for ? overfow) ? applicable ? tube: ? transparent ? tube ? with ? a ? diameter ? in ? the ? range ? 6 ? to ? 13 ? mm ? and ? a ? recommended ? wall ? thickness ? of ? 1 ? mm e32-a02 no ? restriction ? on ? tube ? diameter, ? resistant ? to ? bubbles ? and ? drops ? of ? water applicable ? tube: ? transparent ? tube ? (no ? restriction ? on ? diameter) e32-d36t liquid-contact heat-resistant ? up ? to ? 200c, ? shape ? prevents liquid buildup liquid-contact ? model e32-d82f1 liquid-level ? detection ?? ? area ? sensing ? is ? possible ? with ? minimal ? infuence ? from ? bubbles ? and ? drops ? of ? water ? (e32-a01/a02/d36t). ?? ? for ? safety ? when ? disconnections ? occur, ? two ? models ? have ? been ? developed, ? a ? light ? on ? model ? for ? liquid ? presence ? and ? a ? light ? on ? model ? for ? liquid ? absence ? (e32-a01/ ? a02). ? ? tube-mounting ? model ? liquid-contact ? model e32-d36t label ? detection ?? ? built-in ? lens ? and ? high-power ? beam ? enable ? the ? reliable ? detection ? of ? labels ? through ? a ? mounting ? board. ? ?? ? these ? fiber ? units ? can ? be ? washed ? with ? hydrogen ? peroxide, ? making ? them ? ideal ? for ? the ? food ? industry. ? applications detecting ? labels ratings/characteristics ambient ? temperature C40c ? to ? 70c ? (no ? icing ? or ? condensation) fiber ? material plastic ? degree ? of ? protection ip67 e32-g14 e32-g14 10 ? mm e32-d82f1 operating ? principle ? tube-mounting ? liquid-contact ? model the ? presence/absence ? of ? liquid ? is ? detected ? using ? the ? refractive ? properties ? of ? light. ? more ? specifcally, ? it ? utilizes ? the ? fact ? that ? the ? difference ? in ? refractive ? index ? between ? the ? air ? and ? the ? tip/tube ? is ? larger ? than ? the ? difference ? between ? the ? liquid ? and ? the ? tip/tube. ? air tube liquid air liquid no liquid present liquid present
ordering ? information 9 through-beam ? fiber ? units *1. ?? the ? values ? for ? the ? minimum ? sensing ? object ? are ? representative ? values ? that ? indicate ? values ? obtained ? in ? standard ? mode ? with ? the ? sensing ? distance ? and ? sensitivity ? set ? to ? optimum ? values. ? *2. ?? indicates ? models ? that ? allow ? free ? cutting. ? ? high-resolution ? mode ? ? standard ? mode ? ? super-high-speed ? mode. ???? when ? used ? in ? combination ? with ? the ? e3x-da-s ? amplifer ? unit ? (general-purpose). ? ? high-resolution ? mode ? ? standard ? mode ? ? super-high-speed ? mode. ???? when ? used ? in ? combination ? with ? the ? e3x-mda ? unit. ? when ? used ? in ? combination ? with ? e3x-na-f ? high ? speed ? unit. ????? ? when ? used ? in ? combination ? with ? e3x-na ? or ? e3x-sd ? standard ? units. ? *3. ?? the ? optical ? fber ? is ? 10 ? m ? long ? on ? each ? side ? permitting ? a ? sensing ? distance ? of ? 20,000 ? mm. *4. ?? the ? optical ? fber ? is ? 2 ? m ? long ? on ? each ? side ? permitting ? a ? sensing ? distance ? of ? 4,000 ? mm. r : flexible fber b : bendable fber u : fluorine-coated fber type appearance ? (mm) ? *2 sensing ? distance ? (mm) standard ? object ? (min. ? sensing ? object) ? (mm) ? *1 min. bending ? radius ? (mm) features model ? number standard ? models standard right ? angle m4 ? 4,000 ? 3,700 ? 970 ? 3,100 ? 2,400 ? 970 ? 2,100 630 4 dia (0.005 dia.) r r1 m4 ? screw, ? right ? angle, ? long ? distance e32-t11n+ e39-f1 chemical ? resistant standard ? size m4 900 680 180 580 450 180 360 100 1 dia (0.005 dia.) u r4 m4 ? screw, ? fuorine ? coating e32-t11u special-beam ? models long-distance, ? high-power m14 ? 20,000*3 ? 20,000*3 ? 4,000 ? 13,000 ? 10,000 ? 4,000 ? 14,000 ? 4,200 10 dia. r25 large ? built-in ? lens, ? m14 ? screw e32-t17l m4 ? 4,000*4 ? 4,000*4 ? 1,500 ? 4,000 ? 3,700 ? 1,500 ? 3,000 900 4 dia. (0.1 dia.) m4 screw e32-tc200+ e39-f1 ? 4,000*4 ? 3,700 ? 970 ? 3,100 ? 2,400 ? 970 ? 2,100 630 r r1 m4 ? screw, ? fexible ? fber e32-t11r+ e39-f1 ? 4,000*4 ? 3,700 930 ? 3,000 ? 2,300 930 ? 2,000 600 b r4 m4 ? screw, ? break-resistant e32-t11+ e39-f1
ordering ? information 10 through-beam ? fiber ? units *1. ?? the ? values ? for ? the ? minimum ? sensing ? object ? are ? representative ? values ? that ? indicate ? values ? obtained ? in ? standard ? mode ? with ? the ? sensing ? distance ? and ? sensitivity ? set ? to ? optimum ? values. ? *2. ?? indicates ? models ? that ? allow ? free ? cutting. ? ? high-resolution ? mode ? ? standard ? mode ? ? super-high-speed ? mode. ???? when ? used ? in ? combination ? with ? the ? e3x-da-s ? amplifer ? unit ? (general-purpose). ? ? high-resolution ? mode ? ? standard ? mode ? ? super-high-speed ? mode. ???? when ? used ? in ? combination ? with ? the ? e3x-mda ? unit. ? when ? used ? in ? combination ? with ? e3x-na-f ? high ? speed ? unit. ????? ? when ? used ? in ? combination ? with ? e3x-na ? or ? e3x-sd ? standard ? units. ? *4. ? this ? is ? the ? value ? for ? which ? detection ? is ? possible ? within ? the ? sensing ? area, ? with ? the ? sensing ? distance ? set ? to ? give ? a ? digital ? value ? of ? 1,000. ? (the ? sensing ? object ? is ? stationary.) ? *5. ? for ? continuous ? operation, ? use ? the ? products ? within ? a ? temperature ? range ? of?40c ? to ? 130c. r : flexible fber b : bendable fber u : fluorine-coated fber type appearance ? (mm) ? *2 sensing ? distance ? (mm) standard ? object ? (min. ? sensing ? object) ? (mm) ? *1 min. bending ? radius ? (mm) features model ? number special-beam ? models area-sensing ? 2,200 ? 1,800 450 ? 1,400 550 ? 1,700 (5 ? dia.) ? *4 r r1 area ? width: 50 ? mm e32-et16wr-2 ? 2,400 ? 2,000 500 ? 2,500 ? 1,500 600 900 area ? width: 70 ? mm e32-et16wr-1 10 ? 3,700 ? 2,800 ? 740 ? 2,400 ? 1,800 ? 740 ? 1,500 450 (0.6 ? dia) ? *4 r25 area ? width: 10 ? mm; ? long ? distance e32-t16 m3 ? 750 610 140 ? 470 360 140 300 90 2 dia. (0.1 dia.) multi-point detection (4-head) e32-m21 environment-resistive ? models heat-resistant 150c*5 m4 ? 1,000 ? 760 200 650 500 200 400 120 1.5 dia. (0.1 dia.) r35 heat-resistant ? up ? to ? 150c e32-t51 2 dia. 300 230 60 190 150 60 130 35 heat-resistant ? up ? to ? 150c; ? side-view e32-t54
11 ordering ? information through-beam ? fiber ? units *1. ?? the ? values ? for ? the ? minimum ? sensing ? object ? are ? representative ? values ? that ? indicate ? values ? obtained ? in ? standard ? mode ? with ? the ? sensing ? distance ? and ? sensitivity ? set ? to ? optimum ? values. ? *2. ?? indicates ? models ? that ? allow ? free ? cutting. ? ? high-resolution ? mode ? ? standard ? mode ? ? super-high-speed ? mode. ???? when ? used ? in ? combination ? with ? the ? e3x-da-s ? amplifer ? unit ? (general-purpose). ? ? high-resolution ? mode ? ? standard ? mode ? ? super-high-speed ? mode. ???? when ? used ? in ? combination ? with ? the ? e3x-mda ? unit. ? when ? used ? in ? combination ? with ? e3x-na-f ? high ? speed ? unit. ????? ? when ? used ? in ? combination ? with ? e3x-na ? or ? e3x-sd ? standard ? units. ? *3. ? the ? maximum ? temperature ? that ? can ? be ? withstood ? varies ? with ? the ? location. ? refer ? to ? dimensions ? diagrams ? for ? details. ? *4. ? the ? optical ? fber ? is ? 2 ? m ? long ? on ? each ? side ? permitting ? a ? sensing ? distance ? of ? 4,000 ? mm. r : flexible fber b : bendable fber u : fluorine-coated fber type appearance ? (mm) ? *2 sensing ? distance ? (mm) standard ? object ? (min. ? sensing ? object) ? (mm) ? *1 min. bending ? radius ? (mm) features model ? number environment-resistive ? models heat-resistant 200c m4 360 280 ? 70 230 180 ? 70 180 50 1 dia. (0.005 dia.) r10 heat-resistant ? up ? to ? 200c ? *3 e32-t81r-s m4 600 450 120 230 180 ? 70 180 50 3 dia. (0.1 dia.) r25 heat-resistant ? up ? to ? 200c ? *3; ? side-view e32-t61-s+ e39-f2 m4 ? 4,000*4 ? 3,400 900 ? 3,000 ? 2,200 900 ? 3,000 900 4 dia. (0.1 dia.) heat-resistant ? up to 200 c ? *3, ? long ? distance ? e32-t61-s+ e39-f1 3 dia. ? 1,750 ? 1,300 350 ? 1,100 ? 870 350 ? 700 210 1.7 ? dia. (0.1 dia.) heat-resistant ? up ? to ? 200c ? *3; ? l-shaped; ? long ? distance ? e32-t84s-s 350c m4 600 450 120 390 300 120 900 90 1 dia. (0.005 dia.) heat-resistant ? up ? to ? 350c ? *3 e32-t61-s chemical-resistant ? 7.2 ? dia. ? 2,500 ? 2,000 520 ? 1,600 ? 1,300 520 ? 1,050 380 4 dia. (0.1 dia.) u r4 fluororesin cover, ? round ? head e32-t11f
ordering information 12 through-beam fiber units *1. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *2. indicates models that allow free cutting. high-resolution mode standard mode super-high-speed mode. when used in combination with the e3x-da-s amplifer unit (general-purpose). high-resolution mode standard mode super-high-speed mode. when used in combination with the e3x-mda unit. when used in combination with e3x-na-f high speed unit. when used in combination with e3x-na or e3x-sd standard units. *3. 2 m long on each side permitting a sensing distance of 4,000 mm. *4. for continuous operation, use the product within a range or -40o to 130oc. *5. the maximum temperature that can be withstood varies with location. refer to dimensions diagrams for details. r : flexible fber b : bendable fber u : fluorine-coated fber type appearance (mm) *2 sensing distance (mm) standard object (min. sensing object) (mm) *1 min. bending radius (mm) features model number environment-resistive models chemical-resistant 5 dia. 4,000*3 3,000 800 2,600 2,000 800 1,600 480 4 dia. (0.1 dia.) u r40 fluororesin cover, long distance e32-t12f 5 dia. 500 400 100 320 250 100 200 60 3 dia. (0.1 dia.) fluororesin cover, side-view e32-t14f 5 dia. 1,800 1,400 350 1,190 920 350 700 200 4 dia. (0.1 dia.) fluororesin cover, heat-resistant up to 150c *4 e32-t51f 6 dia. 920 700 190 600 460 190 350 100 1 dia. (0.005 dia.) u r10 fluororesin cover, heat-resistant up to 200c *5 e32-t81f-s vacuum-resistant 260 200 50 170 130 50 100 1.2 dia (0.01 dia.) r30 m4 screw, heat-resistant up to 120c e32-t51v 1m 1,350 1,000 260 850 650 260 600 4 dia. (0.1 dia.) m4 screw, heat-resistant up to 120c, long distance e32-t51v 1m+ e39-f1v
13 ordering ? information through-beam ? fiber ? units *1. ?? the ? values ? for ? the ? minimum ? sensing ? object ? are ? representative ? values ? that ? indicate ? values ? obtained ? in ? standard ? mode ? with ? the ? sensing ? distance ? and ? sensitivity ? set ? to ? optimum ? values. ? *2. ?? indicates ? models ? that ? allow ? free ? cutting. ? ? high-resolution ? mode ? ? standard ? mode ? ? super-high-speed ? mode. ???? when ? used ? in ? combination ? with ? the ? e3x-da-s ? amplifer ? unit ? (general-purpose). ? ? high-resolution ? mode ? ? standard ? mode ? ? super-high-speed ? mode. ???? when ? used ? in ? combination ? with ? the ? e3x-mda ? unit. ? when ? used ? in ? combination ? with ? e3x-na-f ? high ? speed ? unit. ????? ? when ? used ? in ? combination ? with ? e3x-na ? or ? e3x-sd ? standard ? units. ? type appearance ? (mm) ? *2 sensing ? distance ? (mm) standard ? object ? (min. ? sensing ? object) ? (mm) ? *1 min. bending ? radius ? (mm) features model ? number environment-resistive ? models vacuum-resistant 210 130 35 110 85 35 65 1.2 dia. (0.01 dia.) r30 l-shaped, ? heat-resistant ? up ? to ? 120c e32-t54v ? 1m 660 500 180 420 320 180 390 4 dia. (0.1 dia.) l-shaped, ? heat-resistant ? up ? to ? 120c, long ? distance e32-t54v ? 1m+ e36-f1v 630 480 130 410 310 130 250 2 dia. (0.1 dia.) r25 l-shaped, ? heat-resistant ? up ? to ? 200c, long ? distance t32-t84sv ? 1m flanges appearance ? (mm) type model ? number 4-channel ? fange e32-vf4 1-channel ? fange e32-vf1 fiber ? units ? for ? atmospheric-pressure ? side appearance type model ? number amplifer-flange connection ? fiber e32-t10v ? 2m lens ? units appearance ? (mm) type quantity remarks e39-f1v 2 long-distance ? lens ? unit ? can ? be ? used ? for ? the ? e32-51v ? and ? the ? e32-t54v. ? mounting ? brackets appearance ? (mm) type quantity remarks e39-l54v 2 can ? be ? used ? for ? the ? e32-t54v. ?
ordering ? information 14 fiber ? units ? with ? refective ? sensors *1. ?? the ? sensing ? distances ? are ? for ? white ? paper. ? *2. ?? the ? values ? for ? the ? minimum ? sensing ? object ? are ? representative ? values ? that ? indicate ? values ? obtained ? in ? standard ? mode ? with ? the ? sensing ? distance ? and ? sensitivity ? set ? to ? optimum ? values. ? *3. ?? indicates ? models ? that ? allow ? free ? cutting. ? ? high-resolution ? mode ? ? standard ? mode ? ? super-high-speed ? mode. ???? when ? used ? in ? combination ? with ? the ? e3x-da-s ? amplifer ? unit ? (general-purpose). ? ? high-resolution ? mode ? ? standard ? mode ? ? super-high-speed ? mode. ???? when ? used ? in ? combination ? with ? the ? e3x-mda ? unit. ? when ? used ? in ? combination ? with ? e3x-na-f ? high ? speed ? unit. ????? ? when ? used ? in ? combination ? with ? e3x-na ? or ? e3x-sd ? standard ? units. ? r : flexible fber b : bendable fber u : fluorine-coated fber type appearance ? (mm) ? *3 sensing ? distance ? (mm) ? *1 min. ? sensing ? object ? (mm) ? *2 min. bending ? radius ? (mm) features model ? number standard ? models chemical ? resistance standard ? size m6 300 ? 170 50 ? 170 125 50 90 30 (0.005 dia. ) u r4 m6 ? screw, ? fuorine ? coating e32-d11u special-beam ? models long-distance, ? high-power ? 17.5 40 to 1,000 ? 40 ? to ? 700 40 to 240 40 to 600 40 to 490 40 to 240 40 to 400 ? 55 ? to ? 70 b r4 large ? built-in ? lens, ? screw ? mounting e32-d16 m6 650 400 110 400 ? 270 110 200 65 (0.005 dia. ) r25 m6 screw e32-d11l m4 210 130 30 130 85 35 50 ? 17 r10 m4 screw e32-d21l 3 dia. 3-dia. ? cylinder e32-d22l ultracompact, ? thin ? sleeve 0.8 dia. 3 dia. sleeve cannot be bent. 25 16 4 16 10 4 10 3.3 b r4 0.8-dia. sleeve e32-d33 0.5 dia. 2 dia. sleeve cannot be bent. 5 3 0.8 3 2 0.8 1.5 0.5 0.5-dia. sleeve e32-d331
15 ordering ? information fiber ? units ? with ? refective ? sensors *1. ?? the ? sensing ? distances ? are ? for ? white ? paper. ? *2. ?? the ? values ? for ? the ? minimum ? sensing ? object ? are ? representative ? values ? that ? indicate ? values ? obtained ? in ? standard ? mode ? with ? the ? sensing ? distance ? and ? sensitivity ? set ? to ? optimum ? values. ? *3. ?? indicates ? models ? that ? allow ? free ? cutting. ? ? high-resolution ? mode ? ? standard ? mode ? ? super-high-speed ? mode. ???? when ? used ? in ? combination ? with ? the ? e3x-da-s ? amplifer ? unit ? (general-purpose). ? ? high-resolution ? mode ? ? standard ? mode ? ? super-high-speed ? mode. ???? when ? used ? in ? combination ? with ? the ? e3x-mda ? unit. ? when ? used ? in ? combination ? with ? e3x-na-f ? high ? speed ? unit. ????? ? when ? used ? in ? combination ? with ? e3x-na ? or ? e3x-sd ? standard ? units. ? *4. ? for ? continuous ? operation, ? use ? the ? products ? within ? a ? temperature ? range ? of ? ?40c ? to ? 90c. ? *5. ? for ? continuous ? operation, ? use ? the ? products ? within ? a ? temperature ? range ? of ? ?40c ? to ? 130c. ? r : flexible fber b : bendable fber u : fluorine-coated fber type appearance ? (mm) ? *3 sensing ? distance ? (mm) ? *1 min. ? sensing ? object ? (mm) ? *2 min. bending ? radius ? (mm) features model ? number special-beam ? models limited-refective 2 to 6 (center: 4) 2 to 6 (center: 4) 2 to 6 (center: 4) 2 to 6 (center: 4) 2 to 6 (center: 4) 2 to 6 (center: 4) 2 to 6 (center: 4) 2 to 6 (center: 4) (0.005 dia.) r10 heat ? resistant ? up ? to ? 105c ? *4, ? top-view e32-l24l ? 5.4 ? to ? 9 ? (center: ? 7.2) ? 5.4 ? to ? 9 ? (center: ? 7.2) ? 5.4 ? to ? 9 ? (center: ? 7.2) ? 5.4 ? to ? 9 ? (center: ? 7.2) ? 5.4 ? to ? 9 ? (center: ? 7.2) ? 5.4 ? to ? 9 ? (center: ? 7.2) ? 5.4 ? to ? 9 ? (center: ? 7.2) ? 5.4 ? to ? 9 ? (center: ? 7.2) heat ? resistant ? up ? to ? 105c ? *4, ? top-view e32-l25l 4 to 10 4 to 10 4 to 10 4 to 10 4 to 10 4 to 10 4 to 10 4 to 10 r25 heat ? resistant ? up ? to ? 200c, ? fat-view e32-l86 0 to 15 0 to 15 0 to 12 0 to 15 0 to 15 0 to 12 0 to 15 0 to 13 wide-range ? sensing, ? fat-view ? e32-l16 environment-resistive ? models heat-resistant 150c m6 400 230 ? 72 230 165 ? 72 120 40 (0.005 dia.) r35 heat ? resistant ? up ? to ? 150c e32-d51
ordering ? information 16 fiber ? units ? with ? refective ? sensors *1. ?? the ? sensing ? distances ? are ? for ? white ? paper. ? *2. ?? the ? values ? for ? the ? minimum ? sensing ? object ? are ? representative ? values ? that ? indicate ? values ? obtained ? in ? standard ? mode ? with ? the ? sensing ? distance ? and ? sensitivity ? set ? to ? optimum ? values. ? *3. ?? indicates ? models ? that ? allow ? free ? cutting. ? ? high-resolution ? mode ? ? standard ? mode ? ? super-high-speed ? mode. ???? when ? used ? in ? combination ? with ? the ? e3x-da-s ? amplifer ? unit ? (general-purpose). ? ? high-resolution ? mode ? ? standard ? mode ? ? super-high-speed ? mode. ???? when ? used ? in ? combination ? with ? the ? e3x-mda ? unit. ? when ? used ? in ? combination ? with ? e3x-na-f ? high ? speed ? unit. ????? ? when ? used ? in ? combination ? with ? e3x-na ? or ? e3x-sd ? standard ? units. ? *4. ? the ? maximum ? temperature ? that ? can ? be ? withstood ? varies ? with ? the ? location. ? refer ? to ? dimensions ? diagrams ? for ? details. r : flexible fber b : bendable fber u : fluorine-coated fber type appearance ? (mm) ? *3 sensing ? distance ? (mm) ? *1 min. ? sensing ? object ? (mm) ? *2 min. bending ? radius ? (mm) features model ? number environment-resistive ? models heat-resistant 200c m6 150 90 ? 27 90 63 ? 27 45 15 (0.005 dia.) r10 heat ? resistant ? up ? to ? 200c ? *4 e32-d81r-s e32-d81r 350c m6 r25 heat ? resistant ? up ? to ? 350c ? *4 e32-d61-s e32-d61 400c 1.25 dia. m4 min. ? bending ? radius ? of ? sleeve: ? 10 100 60 18 60 40 18 30 10 r25 heat ? resistant ? up ? to ? 400c ? *4, ? with ? sleeve e32-d73-s e32-d73 chemical-resistant 6 dia. 160 95 30 95 ? 70 30 50 16 (0.005 dia.) u r40 fluororesin cover, ? long ? distance e32-d12f 6 dia. ? 70 40 10 40 28 10 20 6.5 fluororesin cover, ? side-view ? e32-d14f
ordering ? information 17 lens ? units type appearance applicable fiber ? units sensing ? distance ? (mm) standard ? object ? (min. ? sensing ? object) ? (mm) ? *1 features lens model ? number through-beam ? lens ? units long-distance ? lens ? units e32-t11l ? 4,000*2 ? 3,200 840 ? 1,100 ? 870 350 ? 700 210 4 dia. (0.1 dia.) long-distance ? sensing; ? opening ? angle: ? 5 ? to ? 40 ? (heat ? resistant up ? to ? 200c) e39-f1 e32-tc200 ? 4,000*2 ? 4,000*2 ? 1,500 ? 4,000*2 ? 3,700 ? 1,500 ? 3,000 900 e32-t11r ? 4,000*2 ? 3,700 ? 970 ? 3,100 ? 2,400 ? 970 ? 2,100 630 e32-t11 ? 4,000*2 ? 3,600 930 ? 3,000 ? 2,300 930 ? 2,000 600 e32-t11n ? 4,000*2 ? 3,700 ? 970 ? 3,100 ? 2,400 ? 970 ? 2,100 630 e32-t11u ? 4,000*2 ? 3,600 930 ? 3,000 ? 2,300 930 ? 2,000 600 accessories *1. ?? the ? values ? for ? the ? minimum ? sensing ? object ? are ? representative ? values ? that ? indicate ? values ? obtained ? in ? standard ? mode ? with ? the ? sensing ? distance ? and ? sensitivity ? set ? to ? optimum ? values. ? ? high-resolution ? mode ? ? standard ? mode ? ? super-high-speed ? mode ? when ? used ? in ? combination ? with ? the ? e3x-da-s ? amplifer ? unit ? (general-purpose). ? ? high-resolution ? mode ? ? standard ? mode ? ? super-high-speed ? mode ? when ? used ? in ? combination ? with ? the ? e3x-mda ? unit. ? when ? used ? in ? combination ? with ? e3x-na-f ? high ? speed ? unit. ????? ? when ? used ? in ? combination ? with ? e3x-na ? or ? e3x-sd ? standard ? units. ? *2. ? the ? optical ? fber ? is ? 2 ? m ? long ? on ? each ? side ? to ? permit ? a ? total ? sensing ? distance ? of ? 4,000 ? mm.
18 ordering ? information type appearance applicable fiber ? units sensing ? distance ? (mm) standard ? object ? (min. ? sensing ? object) ? (mm) ? *1 features lens model ? number through-beam ? lens ? units long-distance ? lens ? units e32-t81r-s ? 2,650 ? 2,100 520 ? 1,600 ? 1,300 520 ? 1,050 380 4 dia. (0.1 dia.) long-distance ? sensing; ? opening ? angle: ? 5 ? to ? 40 ? (heat ? resistant up ? to ? 200c) e39-f1 e32-t61-s ? 4,000*2 ? 3,400 900 ? 3,000 ? 2,200 900 ? 3,000 900 side-view ? units e32-t11l 910 800 180 600 520 180 500 150 3 dia. (0.1 dia.) side-view, ? space-saving; ? opening ? angle: ? 20 ? to ? 60 ? (heat ? resistant up ? to ? 200c) e39-f2 e32-tc200 840 ? 700 160 ? 470 360 140 300 90 e32-t11r 520 400 100 330 260 100 220 65 e32-t11 820 660 160 530 430 160 360 100 accessories *1. ?? the ? values ? for ? the ? minimum ? sensing ? object ? are ? representative ? values ? that ? indicate ? values ? obtained ? in ? standard ? mode ? with ? the ? sensing ? distance ? and ? sensitivity ? set ? to ? optimum ? values. ? ? high-resolution ? mode ? ? standard ? mode ? ? super-high-speed ? mode ? when ? used ? in ? combination ? with ? the ? e3x-da-s ? amplifer ? unit ? (general-purpose). ? ? high-resolution ? mode ? ? standard ? mode ? ? super-high-speed ? mode ? when ? used ? in ? combination ? with ? the ? e3x-mda ? unit. ? when ? used ? in ? combination ? with ? e3x-na-f ? high ? speed ? unit. ????? ? when ? used ? in ? combination ? with ? e3x-na ? or ? e3x-sd ? standard ? units. ? *2. ? the ? optical ? fber ? is ? 2 ? m ? long ? on ? each ? side ? to ? permit ? a ? total ? sensing ? distance ? of ? 4,000 ? mm.
ordering ? information 19 type appearance applicable fiber ? units sensing ? distance ? (mm) ? *1 standard ? object ? (min. ? sensing ? object) ? (mm) ? *3 features lens model ? number through-beam ? lens ? units side-view ? units e32-t11u 820 660 160 530 430 160 360 100 3 dia. (0.1 dia.) side-view, ? space-saving ? opening ? angle: ? 20 ? to ? 60 ? (heat ? resistant up ? to ? 200c) e39-f2 e32-t81r-s 360 280 ? 70 190 150 60 130 35 e32-t61-s 600 450 120 390 300 120 390 130 refection ? units e32-t11l e32-tc200 e32-t11r e32-t11 e32-t11u e32-t81r-s e32-t61-s long ? distance ? refection ? (heat ? resistant ? up ? to ? 200c) e39-f3 small-spot ? lens ? units e32-c42 spot ? diameter ? variable ? in ? the ? range ? 0.1 ? to ? 0.6 ? mm ? at ? distances ? in ? the ? range ? 6 ? to ? 15 ? mm small ? spot ? (variable) e39-f3a e32-d32 spot ? diameter ? variable ? in ? the ? range ? 0.5 ? to ? 1 ? mm ? at ? distances ? in ? the ? range ? 6 ? to ? 15 ? mm e32-c41 0.1-dia. ? spot ? at ? a ? distance ? of ? 7 ? mm small ? spot e39-f3a-5 e32-c31 0.5-dia. ? spot ? at ? a ? distance ? of ? 7 ? mm e32-c41 0.2-dia. ? spot ? at ? a ? distance ? of ? 17 ? mm long ? distance, ? small ? spot e39-f3b e32-c31 0.5-dia. ? spot ? at ? a ? distance ? of ? 17 ? mm e32-c31 e32-c41 spot ? diameter ? of ? 4 ? mm ? max. ? at ? distances ? in ? the ? range ? 0 ? to ? 20 ? mm long-distance ? sensing, ? parallel ? light e39-f3c accessories *1. ?? sensing ? distance ? when ? operated ? with ? e3x-da-s ? amplifer *2. ?? sensing ? distance ? when ? operated ? with ? e3x-mda ? amplifer *3. ?? the ? values ? for ? the ? minimum ? sensing ? object ? are ? representative ? values ? that ? indicate ? values ? obtained ? in ? standard ? mode ? with ? the ? sensing ? distance ? and ? sensitivity ? set ? to ? optimum ? values. ? ? high-resolution ? mode ? ? standard ? mode ? ? super-high-speed ? mode ? *when ? used ? in ? combination ? with ? the ? e3x-da-s ? amplifer ? unit ? (general-purpose). ? ? high-resolution ? mode ? ? standard ? mode ? ? super-high-speed ? mode ? *when ? used ? in ? combination ? with ? the ? e3x-mda ? unit. ? *when ? used ? in ? combination ? with ? e3x-na-f ? high ? speed ? unit. ????? ? *when ? used ? in ? combination ? with ? e3x-na ? or ? e3x-sd ? standard ? units. ?
20 ordering ? information protective ? spiral ? tube appearance application applicable ? fiber ? units tube ? length model ? number fiber protection m3-screw ? models ? e32-d21 e32-dc200e ? e32-dc200f e32-c31 500 ? mm e39-f32a5 1 ? m e39-f32a m3-screw ? models ? e32-t21 (except ? the ? e32-t21r.) ? e32-tc200e ? e32-tc200f 500 ? mm e39-f32b5 1 ? m e39-f32b m4-screw ? models ? e32-t11 e32-tc200 ? e32-tc200b e32-t51 500 ? mm e39-f32c5 1 ? m e39-f32c m6-screw ? models ? e32-d11 e32-dc200 ? e32-dc200b ? e32-cc200 e32-d51 500 ? mm e39-f32d5 1 ? m e39-f32d note: ? before ? using ? a ? protective ? spiral ? tube, ? remove ? the ? protective ? tube ? that ? protects ? the ? area ? between ? the ? head ? and ? the ? optical ? fber ? provided ? with ? some ? models. other ? accessories appearance application name applicable fiber units remarks model ? number used ? to ? cut ? the ? fber. cutter fiber ? units ? that ? allow ? free ? cutting provided ? with ? applicable ? fiber ? units. e39-f4 attachments ? for ? inserting ? thin ? fbers ? into ? amplifer ? units thin-fber ? attachments fiber ? units ? that ? allow ? free ? cutting ? and ? have ? a ? 1.0-dia. ? sheath ? ? 2 ? per ? set ? ? ?? provided ? with ? applicable ? fiber ? units. e39-f9 used ? to ? extend ? fbers. fiber ? connectors fiber ? units ? that ? allow ? free ? cutting ? and ? have ? a ? 2.2-dia. ? sheath e32-f10 easy-to-use, ? one-touch ? relay ? connectors fiber ? units ? that ? allow ? free ? cutting e39-f13: ? used ? for ? fiber ? units ? with ? a ? 2.2-dia. ? sheath. ? e39-f14: ? used ? for ? fiber ? units ? with ? a ? 1.0-dia. ? sheath. ? e39-f15: ? used ? for ? fiber ? units ? with ? a ? sheath ? diameter ? between ? 1.0 ? and ? 2.2 ? mm. e39-f13 e39-f14 e39-f15 used ? to ? bends ? in sleeves. sleeve bender e32-tc200b(4) ? e32-tc200f(4) ? e32-dc200f(4) e39-f11 accessories
21 ratings/characteristics *1. ? there ? must ? be ? no ? icing ? or ? condensation ? within ? the ? range ? specifed ? for ? the ? ambient ? operating ? temperature. ? *2. ? for ? continuous ? operation, ? use ? the ? products ? within ? a ? temperature ? range ? of ? ?40c ? to ? 90c. ? *3. ? the ? maximum ? temperature ? that ? can ? be ? withstood ? varies ? with ? the ? location. ? refer ? to ? dimensions ? diagrams ? for ? details. ? *4. ? for ? continuous ? operation, ? use ? the ? products ? within ? a ? temperature ? range ? of ? ?40c ? to ? 130c. ? *5. ? these ? values ? are ? based ? on ? the ? assumption ? that ? there ? are ? no ? repeated ? sudden ? changes ? in ? temperature. ? fiber ? units type environment-resistive ? models item heat-resistant e32-t5 e32-d5 e32-t8 r-s e32-d8 r-s e32-t84s-s e32-t6 -s e32-d6 -s e32-d73-s ambient ? operating ? temperature ? *1 ?40c ? to ? 150c ? *4 ?40c ? to ? 200c ? *3 ?60c ? to ? 350c ? *3 ?40c ? to ? 400c ? *3 ambient ? humidity ? *1 35% to 85% fiber ? material plastic ? (fuororesin ? coating) glass ? (fuororesin ? coating) glass ? (sus ? spiral ? coating) degree ? of ? protection iec ? standard: ? ip67 type environment-resistive ? models item chemical-resistant vacuum-resistant all ? other ? models e32-t51f e32-t81f-s all ? other ? models 32-t84sv ambient ? operating ? temperature ? *1 ?40c ? to ? 70c ?40c ? to ? 150c ? *4 ?40c ? to ? 200c ? *3 ?25c ? to ? 120c ?25c ? to ? 200c ambient ? humidity ? *1 35% to 85% fiber ? material plastic ? (fuororesin ? coating) glass ? (fuororesin ? cover) glass ? (fuororesin ? coating) glass ? (sus ? spiral ? coating) degree ? of ? protection iec ? standard: ? ip67 type application-specifc ? models item label-detection liquid-level detection wafer-mapping all ? other ? models e32-a01 e32-a02 e32-d82f ambient ? operating ? temperature ? *1 ?40c ? to ? 70c ?40c ? to ? 200c ? *3 ?40c ? to ? 70c ambient ? humidity ? *1 35% to 85% fiber ? material plastic ? (polyethylene ? coating) plastic ? (fuororesin ? coating) fluororesin cover plastic ? (polyethylene ? coating) degree ? of ? protection iec ? standard: ? ip67 iec ? standard: ? ip50 iec ? standard: ? ip68 iec ? standard: ? ip50 other repeat ? accuracy: ? 1 ? mm ? max. repeat ? accuracy: ? 0.5 ? mm ? max. type application-specifc ? models item glass-substrate-alignment glass-subtrate-mapping all ? other ? models e32-l66 e32-a09 e32-a09h e32-a09h2 ambient ? operating ? temperature ? *1 ?40c ? to ? 70c 0c ? to ? 300c ? *3, ? *5 ?40c ? to ? 70c ?40c ? to ? 150c ? *4 ?40c ? to ? 300c ? *3 ambient ? humidity ? *1 35% to 85% fiber ? material plastic ? (polyethylene ? coating) glass ? (sus ? spiral ? coating) plastic ? (polyethylene ? coating) plastic ? (fuororesin ? coating) glass ? (sus ? spiral ? coating) degree ? of ? protection iec ? standard: ? ip40
dimensions 22 through-beam ? fiber ? units area-sensing ? models e32-et16wr-1 ? e32-et16wr-2 ? e32-t16p ? e32-t16pr e32-t16j ? e32-t16jr e32-t16 ? 19 27 14.5 two, 3.2 dia. 6-dia. countersink 10.7 4 2,000 sensing head* optical fiber: 2.2 dia. 4 20 sensing surface (2 11) optical axis *1. material: heat-resistant abs *2. provided with stickers with slits of width 0.5 and 1 mm (2 of each). 4 3.3 sensing surface (2 11) receiver emitter sensing surface (2 11) 27 20 * sensing head* optical axis 2 14.5 10.7 4 two, 3.2-dia. holes with 6-dia. countersinks 2000 optical fiber: 2.2 dia. 19 *material: abs for the sensing head and pmma for the prism. 27 2,000 6 dia. 25 20 *1. material: heat-resistant abs *2. provided with stickers with slits of width 0.5 and 1 mm (2 of each). sensing head*1 two, m3 optical axis lens (2 10) (pmma) 8.4 optical fiber: 2.2 dia. 15.5 8.85 3 heat-resistant ? models e32-t51 ? e32-t54 ? 15 2.4 2.85 dia. 1 7 1.5 dia. 17 2,000 optical fiber: 2.2 dia. two hexagonal nuts two toothed washers sensing head: m4 0.7* *material: brass/nickel plating 1 1.7 2 dia. 45 2.5 45 sensing surface 25 20 sensing head: 3 dia.* *material: stainless steel (sus303) optical fiber: 2.2 dia. 2,000 note: ?? the ? maximum ? allowable ? temperature ? is ? 150c. ? the ? maximum ? allowable ? temperature ? for ? continuous ? operation ? is ? 130c. note: ?? the ? maximum ? allowable ? temperature ? is ? 150c. ? the ? maximum ? allowable ? temperature ? for ? continuous ? operation ? is ? 130c.
23 dimensions indicates ? models ? that ? allow ? free ? cutting. ? through-beam ? fiber ? units heat-resistant ? models e32-t81r-s 7 0.7 dia. 20 3 2.4 4 dia. 10 2,000 5 b 25 13 *2 a 4 dia. 2 dia. 3.6 dia. fluororesin tube protective tube two hexagonal nuts two toothed washers sensing head: m4 0.7 *1 m2.6 0.45 *1. material: stainless steel (sus303) sleeve 2.2 dia. (75) note: ?? the ? maximum ? allowable ? temperature ? for ? section ? a ? and ? b ? are ? 200c. ? and ? 110c, ? respectively. ? the ? section ? inserted ? into ? amplifer ? unit ? (indicated ? by ? *2), ? however, ? must ? stay ? within ? the ? amplifer ? units ? operating ? temperature ? range. e32-t84s-s e32-t61-s lens (2 dia.) 13 *2 25 b 5 a 12 (14.2) 6 30 max. 12 3 dia. 2,000 antislip tread sleeve 4 dia. 4 dia. 3 dia. 3.5 dia. sensing head *1 r5 90 flexible tube: 2.9 dia. (stainless steel) *1. material: stainless steel (sus303) 2.2 dia. note: ?? the ? maximum ? allowable ? temperature ? for ? section ? a ? and ? b ? are ? 200c. ? and ? 110c, ? respectively. ? the ? section ? inserted ? into ? amplifer ? unit ? (indicated ? by ? *2), ? however, ? must ? stay ? within ? the ? amplifer ? units ? operating ? temperature ? range. 7 1 dia. 20 3 2.4 4 dia. *3 10 2,000 25 5 b 13 *2 a 4 dia. sleeve flexible tube: 2.8 dia. (stainless steel) hexagonal caulking two hexagonal nuts two toothed washers sensing head: m4 0.7 *1 m2.6 0.45 *1. material: stainless steel (sus303) *3. the diameter is 6 mm if the fiber length exceeds 10 m. 2.2 dia. note: ?? the ? maximum ? allowable ? temperature ? for ? section ? a ? and ? b ? are ? 200c. ? and ? 110c, ? respectively. ? the ? section ? inserted ? into ? amplifer ? unit ? (indicated ? by ? *2), ? however, ? must ? stay ? within ? the ? amplifer ? units ? operating ? temperature ? range. chemical-resistant ? models e32-t11f ? e32-t12f ? 7.2 dia. nut *1 sensing head *1 optical fiber: 2.2 dia. *2 lens: 3 dia. 10 (1 0 .7 ) (35) 19.8 3 10 2,000 r3.6 *1. material: pfa *2. sheath material: fluororesin (21) optical axis 2,000 sensing head: 5 dia. fluororesin 4 dia. optical fiber: 2.2 dia. 100 4.5 e32-t14f ? e32-t51f ? 20 2,000 sensing head: 5 dia. fluororesin 4 dia. optical fiber: 2.2 dia. lens: 4 dia. 100 100 (20) 2,000 lens: 3.7 dia. optical fiber: 2.2 dia. fluororesi n sensing head: 5 dia. e32-t81f-s 3.7 dia. 30 (0.8) 2,000 13 *2 (70) b 25 5 a 4 dia. sleeve 2.2 dia. protective tube pfa tube 2 dia. pfa cover (r6) 6 dia. note: ?? the ? maximum ? allowable ? temperature ? for ? section ? a ? and ? b ? are ? 200c. ? and ? 110c, ? respectively. ? the ? section ? inserted ? into ? amplifer ? unit ? (indicated ? by ? *2), ? however, ? must ? stay ? within ? the ? amplifer ? units ? operating ? temperature ? range.
dimensions 24 through-beam ? fiber ? units vacuum-resistant ? models e32-t51v e32-t54v 83 m2.6 0.45 two spring washers 4 dia. optical fiber: 3 dia. 4 dia. connected to flange (vacuum side) 2.2 dia. m4 0.7 * two nuts 20 (30) 1,000 26 1.15 dia. *material: aluminum 18 4.5 3 12 m2.6 0.45 1.15 dia. 3 dia. * 4 4 4 dia. 4 dia. connected to flange (vacuum side) 3 dia. 2.2 dia. 5 dia. r9 (3) (15) 1,000 26 *material: stainless steel (sus304) e32-t84sv e39-f1v (14.2) sensing head: 3 dia.* lens (2 dia.) 12 6 r5 3 dia. 3.5 dia. 90 flexible tube (stainless steel): 2.9 dia. 4 dia. 4 dia. 2.2 dia. connected to flange (vacuum side) 30 max. 12 1,000 26 *material: stainless steel ( sus304 ) 8.9 0.5-dia. hole 6 m2.6 0.45 effective depth: 3.8 spot-facing depth: 0.9 4 dia. e32-vf4 e32-vf1 36 dia. 49 70 dia. 44 dia. 45 90 dia. 80 80 four, 10 dia. 24 flange v40 o-ring flange 8 (96) (63) 10 (23) 22 51 9 6 (33.53) 30 20 dia. 22 one nut m14 2 two, connectors one spring washer v15 o-ring note ? 1. ?? perform ? mounting ? so ? that ? the ? v15 ? o-ring ? is ? on ? the ? atmospheric-pressure ? side ? of ? the ? vacuum ? chamber ? wall. ? 2. ?? mounting-hole ? cutout ? dimensions: ? 14.5 ? dia. ? 0.2 ? mm note ? 1. ?? perform ? mounting ? so ? that ? the ? v15 ? o-ring ? is ? on ? the ? atmospheric-pressure ? side ? of ? the ? vacuum ? chamber ? wall. ? 2. ?? mounting-hole ? cutout ? dimensions: ? 14.5 ? dia. ? 0.2 ? mm
dimensions 25 fiber ? units ? with ? refective ? sensors limited-refective ? models e32-l25 e32-l25a optical fiber: two, 2.2 dia. 2,000 20 10 6.5 5 4.8 6.5 20 sensing head* two, 3.2-dia. holes with 6-dia. countersinks 4 sensing distance *material: heat-resistant abs 20 5 2,000 6.5 sensing distance 4.8 6.5 sensing head* optical fiber: two, 2.2 dia. 20 10 4 two, 3.2-dia. holes with 6-dia. countersinks *material: heat-resistant abs note: ? there ? is ? a ? white ? line ? on ? the ? fber ? that ? is ? inserted ? in ? the ? emitter-side ? port. note: ? there ? is ? a ? white ? line ? on ? the ? fber ? that ? is ? inserted ? in ? the ? emitter-side ? port. e32-l86 a two, 4 dia. optical axi s sensing head (stainless steel ) two, 3.2-dia. holes with 6-dia. countersinks on one side flexible tube: 2.8 dia. * 5.5 b 25 33.5 27 19 7 11 13 5 (max.) 2,000 4 dia. 8.9 18 *material: stainless steel note: ?? the ? maximum ? allowable ? temperature ? for ? section ? a ? and ? b ? are ? 200c. ? and ? 110c, ? respectively. ? the ? section ? inserted ? into ? amplifer ? unit ? (indicated ? by ? *2), ? however, ? must ? stay ? within ? the ? amplifer ? units ? operating ? temperature ? range. heat-resistant ? models e32-d51 ? two, 1.5 dia. 3.1 4.9 two hexagonal nuts two toothed washers sensing head: m6 0.75* optical fiber: two, 2.2 dia. 2.4 13 3 17 2,000 10 *material: brass/nickel plating note: ?? the ? maximum ? allowable ? temperature ? is ? 150c. ? the ? maximum ? allowable ? temperature ? for ? continuous ? operation ? is ? 130c. e32-d81r-s e32-d81r ? using ? the ? e32-d81r-s using ? the ? e32-d81r b 5 dia. 2.2 dia. sleeve sus flexible tube 15 11.5 5 10 *2 4.5 5 8.5 sus303 fiber: 1.2 dia. sleeve m4 0.7 2.2 dia. sensing head: m6 0.75 *1 6.4 3 2 5 dia. 8 15 13 *2 20 5 6.5 16.5 b 5 (70) a 3 (4.2 dia.) 2,000 two toothed washers (sus) two hexagonal nuts (sus) *1. material: stainless steel (sus303) protective tube (gray) note: ?? the ? maximum ? allowable ? temperature ? for ? section ? a ? and ? b ? are ? 200c. ? and ? 110c, ? respectively. ? the ? section ? inserted ? into ? amplifer ? unit ? (indicated ? by ? *2), ? however, ? must ? stay ? within ? the ? amplifer ? units ? operating ? temperature ? range.
26 dimensions indicates ? models ? that ? allow ? free ? cutting. ? fiber ? units ? with ? refective ? sensors heat-resistant ? models e32-d61-s e32-d61 ? using ? the ? e32-d61-s using ? the ? e32-d61 10 ab 20 5 *4 3 2,000 5 dia. 2.2 dia. sleeve 5 dia. *3 3.5 dia. sus flexible tube two hexagonal nuts two toothed washers sensing head: m6 0.75 *1 1.4 dia. m4 0.7 15 11.5 5 10 *2 4.5 5 8.5 3 2 2.4 *1. material: stainless steel (sus303) *3. the diameter is 6 if the fiber length exceeds 10 m. *4. the diameter is 10 if the fiber len g th exceeds 10 m. b sleeve 5 dia. hexagonal caulking sus316l 16.5 6.5 5 *2 13 8 6.4 15 note: ?? the ? maximum ? allowable ? temperature ? for ? section ? a ? and ? b ? are ? 200c. ? and ? 110c, ? respectively. ? the ? section ? inserted ? into ? amplifer ? unit ? (indicated ? by ? *2), ? however, ? must ? stay ? within ? the ? amplifer ? units ? operating ? temperature ? range. e32-d73-s e32-d73 ? using ? the ? e32-d73-s using ? the ? e32-d73 5 7 60 20 10 2,000 16.5 *2 13 5 ab c 2.4 5 6.5 6.4 1 5 8 sleeve 5 dia. 4 dia. 2.8 dia. hexagonal caulking sus316l sus flexible tube two toothed washers two hexagonal nuts sensing head: m4 0.7 *1 2.5 dia. 1.65 dia. stainless-steel tube: 1.25 dia. 1 dia. *1. material: stainless steel (sus303) c 5 dia. 2.2 dia. sleeve 15 11.5 5 10 *2 4.5 5 8.5 note: ?? the ? maximum ? allowable ? temperature ? for ? section ? a ? and ? b ? are ? 200c. ? and ? 110c, ? respectively. ? the ? section ? inserted ? into ? amplifer ? unit ? (indicated ? by ? *2), ? however, ? must ? stay ? within ? the ? amplifer ? units ? operating ? temperature ? range. chemical-resistant ? models e32-d12f ? e32-d14f ? 2,000 16 100 sensing head: 6 dia. fluororesin 5 dia. optical fiber: two, 2.2 dia. 100 2,000 4.5 (26) fluororesin tube (protective cover ) optical-axis mar k optical axis sensing head: 7 dia. optical fiber: 2.2 dia.
dimensions 27 e32-g14 ? 1.6 4 23.5 9.4 1.6 9.2 24 r3.5 lens (pmma) 10 optical axis 20 sensing head* 25.2 36.3 2,000 r1.6 r1.6 3.2 9 7.6 8.4 8 optical fiber: two, 2.2 dia. *material: abs liquid-level ? detection ? models ? e32-d36t ? sensing head thirty-two, 0.265 dia. * optical fiber: two, 2.2 dia. reception side: sixteen, 0.265 dia. emission side: sixteen, 0.265 dia. 2,000 15 13.25 4.4 eight, r0. 5 r10 (100) 5 2 4 5 11.4 23.45 5 20.4 e32-l25t ? 10 6 sensing head (pc) mounting hole 15.2 (13) 1.2 2.8 6 4 16 18 2,000 25 two fiber attachments (e39-f9) optical fiber: two, 1 dia. two, 3.2-dia. lenses (pc) e32-a01 e32-a02 sensing surface (2 11) optical axi s sensing head* emitter receiver tube holder 20 27 4.2 19.9 5,000 *material: abs for the sensing head, pmma for the prism, and pbt for the pipe holder. sensing surface (2 11) sensing head* tube holder 27 4.5 5 21 3 7 12 14.5 3.3 4.5 1.7 *material: abs for the sensing head, pmma for the prism, and pbt for the pipe holder. 5,000 optical axi s application-specifc ? fiber ? units label-detection models
28 dimensions indicates ? models ? that ? allow ? free ? cutting. ? application-specifc ? fiber ? units liquid-level ? detection ? models ? e32-d82f1 e32-d82f2 2,000 7.2 sensing head (fluororesin): 6 dia. fiber connector (brass/nickel plating): 9 dia. 8 dia. optical fiber: two, 2.2 dia. *2 to the amplifier unit length of unbendable section: 150 (350) *1 2,000 27 42 *1. ( ): e32-d82f2 *2. the 2-m section of optical fiber on the amplifier-unit side is plastic and therefore allows free cutting. models ? for ? glass-substrate ? alignment/mapping e32-a08 e32-a07e1(e2) e32-l66 6.5 10.7 3.8 24.5 1.1 2,000 optical axis two, 3.24-dia. mounting holes with 6-dia. countersinks emission fiber: 2.2 dia. reception fiber: 2.2 dia. 12 14 5 36 two, 2.8-dia. flexible tubes ( stainless steel ) 4 dia. 5.5 2.2 dia. two, 3.2-dia. mounting holes with 6-dia. countersinks 18 sensing head *1 *1. material: stainless steel (sus303) 1 7 11 21.7 a b 5 13 *2 25 2,000 note: ?? the ? maximum ? allowable ? temperature ? for ? section ? a ? and ? b ? are ? 200c. ? and ? 110c, ? respectively. ? the ? section ? inserted ? into ? amplifer ? unit ? (indicated ? by ? *2), ? however, ? must ? stay ? within ? the ? amplifer ? units ? operating ? temperature ? range. e32-a09 e32-a09h e32-a09h2 sensing head* *material: aluminum 2,000 optical fiber: two, 2.2 dia. 12 9 7 23 lens: 5.8 dia. optical axi s two, 3.2-dia. mounting holes with 6-dia. countersinks 20 8.9 b 7 12 30 a 5 2,000 28 13 9 sensing head *1 2.8-dia. flexible tubes* two, 3.24-dia. mounting holes with 6-dia. countersinks lens: 5.8 dia. optical axis 5 dia. 4 dia. 2.2 dia. 24 8.9 *1. material: stainless steel *2 note: ?? the ? maximum ? allowable ? temperature ? for ? section ? a ? and ? b ? are ? 200c. ? and ? 110c, ? respectively. ? the ? section ? inserted ? into ? amplifer ? unit ? (indicated ? by ? *2), ? however, ? must ? stay ? within ? the ? amplifer ? units ? operating ? temperature ? range. wafer-mapping ? models e32-a03 e32-a03-1 e39-l83 mounting bracket (sus) 2 sensing surface 2 dia. 25 20.5 2,000 10 fiber attachment (e39-f9) sensing head *1 stamp (1-mm dia. ) *material: brass/nickel plating 3 dia. 0.4 1.8 3.2 10 11 17.6 3.2 two, r1. 6 r1.6 3.4 4.3 13 12.5 3 18.5 6.5 3 2,000 24.5 10 25 two, 3.4 dia. engraved mark: 1 dia. optical fiber: 1 dia. fiber attachment (e39-f9) 2 dia. sensing surface sensing head * 3 dia. 4.5 10 3.5 *material: brass/nickel platin g
29 dimensions e39-f32a/f32a5 e39-e32b/f32b5 6 dia. 12 l 12 3 dia. end cap *1 tube *2 *1. material: brass/nickel plating *2. material: stainless steel (sus304) (4.6 dia.) head connector *1 m3 0.5; depth: 4 note: ? 1. ?? the ? length ? l ? is ? 1,000 ? for ? the ? e39-f32a/-f32b ? and ? 500 ? for ? the ? e39-f32a5/-f32b5. ? 2. ?? the ? e39-f32b(5) ? consists ? of ? two ? e39-f32a(5)s. e39-f32c/f32c5 12 7 dia. l 12 end cap *1 4 dia. (5.6 dia.) head connector *1 m4 0.7; depth: 4 tube *2 *1. material: brass/nickel plating *2. material: stainless steel ( sus304 ) note: ? the ? length ? l ? is ? 1,000 ? for ? the ? e39-f32c ? and ? 500 ? for ? the ? e39-f32c5. e39-f32d/f32d5 12 8.5 dia. l 12 5 dia. end cap *1 (7 dia.) head connector *1 m6 0.75; depth: 4 tube *2 *1. material: brass/nickel plating *2. material: stainless steel (sus304) note: ? the ? length ? l ? is ? 1,000 ? for ? the ? e39-f32d ? and ? 500 ? for ? the ? e39-f32d5. other ? accessories fiber ? cutter e39-f4 thin-fber ? attachments e39-f9 84 5 standard-fiber insertion hole thin-fiber insertion hole 24.5 1.1 dia. mark indicating position of insertion into amplifier unit 3.6 dia. 25 10 11.7 (2.2 dia.) note: ? two ? per ? set. *provided ? with ? thin-fber ? models. fiber ? connector e39-f10 3.8 dia. 3 dia. 26 12.8 fiber: 2.2 dia. fiber: 2.2 dia. splice *1 retention clip *2 retention clip *2 *1. material: polyester *2. material: brass fiber ? connector e39-f13 e39-f14 e39-f15 2 32.6 (48.6) 8 four, 0.8 29.6 20.4 22.4 3.2 7.6 9.2 four, r0.8 note: dimension a varies with the model number as shown in the following table. dimension a model four, 6 dia. e39-f13 e39-f14 2.4 1.2 e39-f15 2.4/1.2 four, a (see note. ) 27.4 33.8 model dimension ? a e39-f13 2.4 e39-f14 1.2 e39-f15 2.4/1.2 note: ?? dimension ? a ? varies ? with ? the ? model ? number ? as ? shown ? in ? the ? following ? table. accessories protective ? spiral ? tubes
dimensions 30 sleeve bender e39-f11 10.8 27 42.5 10 10 r5 r7.5 r12.5 r10 lens ? units lens ? units e39-f1 side-view units e39-f2 4 dia. 8.9 m2.6 0.45 effective depth: 3.8 spot-facing depth: 0.9 material: ? brass ? for ? the ? body ? and ? optical ? glass ? for ? the ? lens ? itself. 4 dia. 2.8 dia. 9.2 5.7 m2.6 effective depth: 3.2 spot-facing depth: 0.9 material: ? brass ? for ? the ? body ? and ? optical ? glass ? for ? the ? lens ? itself. note: ? two ? per ? set. note: ? two ? per ? set. refection ? unit ? with ? lens e39-f3 3 18 8.5 3.6 12 8 0.2 6.5 6.4 m3 6 angle-setting screw 6.4 two, 3.2 dia. m3 internally toothed washer two, 4 dia. two, m3 3 slotted-head set screws* 20.7 material: ? brass ? for ? the ? body ? and ? aluminum ? for ? the ? base. * ? secure ? the ? fber ? head ? with ? the ? slotted-head ? set ? screws. ? do ? not ? insert ? a ? lens ? (e39-f1). lens ? unit ? for ? refective ? fiber ? units e39-f3a lens ? unit ? for ? refective ? fiber ? units e39-f3a-5 23 13 3 m2 2 allen-head set screw (for securing the fiber) 2.1 dia. 6 dia. 4 dia. lens surface (lens diameter: 3.7 mm) material: ? aluminum ? for ? body ? and ? optical ? glass. ? for ? the ? lens. 6.5 16.5 lens surface ( lens diameter: 3.7 mm ) straight knurling 5 dia. 4 dia. 2.1 dia. m3 0.5 effective screw length: 3 material: ? aluminum ? for ? body ? and ? optical ? glass. ? for ? the ? lens. note: ? this ? is ? the ? lens ? unit ? for ? the ? e32-d32 ? and ? e32-c42. note: ? this ? is ? the ? lens ? unit ? for ? the ? e32-c31 ? and ? e32-c41. lens ? unit ? for ? refective ? fiber ? units e39-f3b lens ? unit ? for ? refective ? fiber ? units e39-f3c 25.2 lens surface (lens diameter: 4.8 mm) m3 0.5 depth: 4.4 24.1 5.5 dia. 6 dia. material: ? aluminum ? for ? body ? and ? optical ? glass. ? for ? the ? lens. straight knurling lens surface (lens diameter: 3.7 mm) m3 0.5 effective screw length: 3 10.9 5.8 4.3 dia. 5 dia. material: ? aluminum ? for ? body ? and ? optical ? glass. ? for ? the ? lens. note: ? this ? is ? the ? lens ? unit ? for ? the ? e32-c31 ? and ? e32-c41. note: ? this ? is ? the ? lens ? unit ? for ? the ? e32-c31 ? and ? e32-c41. accessories other ? accessories ?
31 precautions precautions ? for ? correct ? use ? fiber ? units ? mounting ? tightening ? force ? the ? tightening ? force ? applied ? to ? the ? fiber ? unit ? should ? be ? as ? follows: ? screw-mounting ? model nuts (attachment) spring ? mounting ? clip toothed ? washers cylindrical ? model ? retaining ? screw ? (fat ? head ? or ? sunken ? head) ? (m3 ? max.) fiber ? units claming ? torque m6 ? screw/6-mm ? dia. ? cylinder ? 0.98 ? nm ? max. ? m3/m4 screw ? 0.78 ? nm ? max. ? 2-mm ? dia./3-mm ? dia. ? cylinder ? 0.29 ? nm ? max. ? 1.5-mm ? dia./1-mm ? dia. ? cylinder 0.2 ? nm ? max. e32-t12f ? 5-mm ? dia. ? fuororesin ? model 0.78 ? nm ? max. e32-d12f ? 6-mm ? dia. ? fuororesin ? model e32-l25a e32-m21 up ? to ? 5 ? mm ? to ? the ? tip: ? 0.49 ? nm ? max. ? more ? than ? 5 ? mm ? from ? the ? tip: ? 0.78 ? nm ? max. e32-t16 0.49 ? nm ? max. e32-r21 0.39 ? nm ? max. e32-t16w(r) ? e32-t16p(r) ? e32-t16j(r) ? e32-l24s e32-l24l e32-t25l 0.29 ? nm ? max. use ? a ? proper-sized ? wrench. ? fiber ? cutting ? procedure ? cut ? a ? thin ? fber ? as ? follows: ? an ? attachment ? is ? temporarily ? ftted ? to ? a ? thin ? fber ? before ? shipment. ? thin ? fber ? attachment (e39-f9 temporarily ? ftted secure ? the ? attachment ? after ? adjusting ? the ? position ? of ? it ? in ? the ? direction ? indicated ? by ? the ? arrow. ? insert ? the ? fber ? to ? be ? cut ? into ? the ? e39-f4. ? cutter (e39-f4) two ? holes ? for thin ? fber three ? holes ? for ? standard fber (2.2-mm ? dia.) finished ? state ? (proper ? cutting ? state) ? insertion ? direction approx. 0.5 ? mm note: ? insert ? the ? fber ? in ? the ? direction ? indicated ? by ? arrow. connection ? ?? ? do ? not ? pull ? or ? press ? the ? fiber ? units. ? the ? fiber ? units ? have ? a ? withstand ? force ? of ? 9.8 ? n ? or ? 29.4 ? n ? maximum. ? ?? ? do ? not ? bend ? the ? fiber ? unit ? beyond ? the ? permissible ? bending ? radius ? given ? under ? ordering information. ?? ? do ? not ? bend ? the ? edge ? of ? the ? fiber ? units ? (excluding ? the ? e32-t r ? and ? e32-d r). correct incorrect 20 ? mm ? min. 20 ? mm ? min. amplifer ? unit fiber ? unit ? ?? do ? not ? apply ? excess ? force ? on ? the ? fiber ? units. correct incorrect fiber ? unit nylon ? wireholder the ? fiber ? head ? could ? be ? broken ? by ? excessive ? vibration. ? to ? prevent ? this, ? the ? following ? is ? effective: ? a one-turn loop can absorb vibrations. tape
precautions 32 e39-f11 sleeve bender ?? ? the ? bending ? radius ? of ? the ? stainless ? steel ? tube ? should ? be ? as ? large ? as ? possible. ? the ? smaller ? the ? bending ? radius ? becomes, ? the ? shorter ? the ? sensing ? distance ? will ? be. ? ?? ? insert ? the ? tip ? of ? the ? stainless ? steel ? tube ? to ? the ? sleeve bender and bend the ? stainless ? steel ? tube ? slowly ? along ? the ? curve ? of ? the ? sleeve ? bender ? (refer ? to ? the ? fgure). ? 90 ? max. 10 ? mm 10 ? mm do ? not ? bend ? here. heat-resistant ? fiber ? units ? (e32-d51 ? and ? e32-t51) ? ?? ? the ? fbers ? of ? these ? units ? cannot ? be ? extended ? using ? the ? e39- ? f10 ? fiber ? connector. ? ?? ? the ? maximum ? allowable ? temperature ? for ? continuous ? operation ? with ? these ? units ? is ? 130c. ? it ? is ? 150c ? for ? short- term ? use. ? e32-t14 ? and ? e32-g14 ? these ? units ? may ? enter ? the ? light-on ? state ? if ? there ? are ? refecting ? objects ? at ? the ? ends ? of ? the ? lenses. ? in ? this ? case, ? attach ? the ? black ? stickers ? provided ? to ? the ? ends ? of ? the ? lenses. ?? stickers wafer ? sensors ? (e32-l25(a)) ? ?? ? to ? ensure ? correct ? performance, ? insert ? the ? fber ? with ? a ? white ? line ? into ? the ? emitter-side ? port ? of ? the ? amplifer ? unit. ? e32-t16 ? and ? e32-t16p ? slit provided e32-t16s ? sensing ? head example ?? ? ? to ? use ? the ? slit ? provided, ? peel ? off ? the ? backing ? sheet, ? align ? it ? with ? the ? edges ? of ? the ? sensing ? surface, ? and ? attach ? it ? to ? the ? sensing ? head. ? use ? the ? slit ? in ? applications ? where ? saturation ? occurs ? (i.e., ? changes ? in ? light ? intensity ? cannot ? be ? obtained) ? due ? to ? short ? sensing ? distances. e32-m21 separate ? the ? 4 ? fbers ? by ? distances ? suffcient ? to ? prevent ? interference. ? vacuum-resistant ? fiber ? units ? (e32-v) ? although ? flanges, ? fiber ? units ? on ? the ? vacuum ? side, ? and ? lens ? units ? have ? been ? cleaned, ? as ? an ? extra ? precaution, ? clean ? these ? products ? with ? alcohol ? before ? use ? in ? high-vacuum ? environments ? to ? ensure ? that ? they ? are ? properly ? degreased. ? liquid-level ? detection ? sensors ? (e32-d82f) ? ?? ? secure ? the ? fiber ? unit ? using ? the ? unbendable ? section. ? otherwise, ? the ? liquid-level ? detection ? position ? may ? be ? displaced. ?? ? for ? applications ? in ? hazardous ? environments, ? install ? the ? fiber ? unit ? in ? the ? hazardous ? environment ? but ? install ? the ? amplifer ? unit ? in ? a ? safe ? environment. ? liquid-level ? detection ? sensors: ? tube-mounting ? models ? ?? ? ensure ? that ? the ? tube ? is ? not ? deformed ? when ? using ? a ? band ? to ? secure ? the ? fiber ? unit. ? ?? ? drops ? of ? water, ? bubbles, ? or ? haze ? inside ? the ? tube ? may ? cause ? malfunctions. ? ?? ? adjustment ? e32-g14 ? the ? sensing ? distance ? is ? short, ? making ? the ? incident ? light ? intensity ? large. ? this ? makes ? it ? impossible ? to ? teach ? without ? a ? workpiece. ? perform ? teaching ? with ? and ? without ? a ? workpiece. ? liquid-level ? (e32-d82f) ? detection ? position ? the ? liquid-level ? detection ?? liquid-level detection position 5.2 2 mm ?? (from ? the ? end ? of ? the ? fuororesin ? section) position ? is ? at ? a ? distance ? of ? 5.22 ? mm ? from ? the ? end ? of ? the ? fuororesin ? section. ? (refer ? to ? the ? diagram ? on ? the ? right.) ? the ? liquid-level ? detection ? po-sition ? varies ? with ? the ? surface ? tension ? of ? the ? liquid ? and ? the ? degree ? of ? wetness ? at ? the ? fiber ? units ? detection ? position. ? ?? ? other ? considerations ? liquid ? level ? (e32-d82f) ? ?? ? operation ? may ? become ? unstable ? in ? the ? following ? cases: ? ? bubbles ? stick ? to ? the ? cone ? of ? the ? sensing ? head. ? ? solute ? is ? deposited ? on ? the ? cone ? of ? the ? sensing ? head. ? ? the ? liquid ? has ? a ? high ? viscosity. ? ?? ? there ? are ? some ? liquids, ? such ? as ? milky ? white ? liquids, ? for ? which ? detection ? is ? not ? possible. ? ?? ? do ? not ? let ? the ? end ? of ? the ? fuororesin ? section ? bump ? into ? another ? object. ? damage ? to, ? or ? deformation ? of, ? the ? sensing ? head ? may ? result ? in ? unstable ? operation. ? heat-resistant ? fiber ? units ? (e32-d81r, ? e32-d61, ? and ? e32-d73) ? the ? pitch ? of ? the ? emission-side ? and ? reception-side ? fber- insertion ? ports ? varies ? with ? the ? amplifer ? unit. ? be ? sure ? to ? use ? an ? appropriate ? fiber ? unit. ? amplifer ? unit fiber ? unit e3x-da -s e3x-mda e32-d -s e3x-da -n e3x-na e32-d 1.2 ? mm ? dia. ? max 1.3 ? mm ? dia. ? min. r12.5 ? mm r7.5 ? mm r10 ? mm r5 ? mm fiber tip position mark stainless steel tube
33 precautions accessories use ? of ? e39-r3 ? refector ? 1.? ? use ? detergent, ? etc., ? to ? remove ? any ? dust ? or ? oil ? from ? the ? surfaces ? where ? tape ? is ? applied. ? adhesive ? tape ? will ? not ? be ? attached ? properly ? if ? oil ? or ? dust ? remains ? on ? the ? surface. ? 2.? ? the ? e39-r3 ? cannot ? be ? used ? in ? places ? where ? it ? is ? exposed ? to ? oil ? or ? chemicals. ? e39-f32 ? protective ? spiral ? tubes ? 1.? ? insert ? a ? fber ? to ? the ? protective ? spiral ? tube ? from ? the ? head ? connector ? side ? (screwed) ? of ? the ? tube. ?? fiber ? unit protective ? spiral ? tube 2.? ? push ? the ? fber ? into ? the ? protective ? spiral ? tube. ? the ? tube ? should ? be ? straight ? so ? that ? the ? fber ? is ? not ? twisted ? when ? inserted. ? then ? turn ? the ? end ? cap ? of ? the ? spiral ? tube. ?? fiber ? unit protective ? spiral ? tube 3.? ? secure ? the ? protective ? spiral ? tube ? on ? a ? suitable ? place ? with ? the ? attached ? nut. ?? protective ? spiral ? tube mounting ? panel hexagon ? clamping ? nut fiber ? unit toothed ? washer 4.? ? use ? the ? attached ? saddle ? to ? secure ? the ? end ? cap ? of ? the ? protective ? spiral ? tube. ? to ? secure ? the ? protective ? spiral ? tube ? at ? a ? position ? other ? than ? the ? end ? cap, ? apply ? tape ? to ? the ? tube ? so ? that ? the ? portion ? becomes ? thicker ? in ? diameter. ?? saddle tube end cap e39-f10 ? fiber ? connector ? mount ? the ? fiber ? connector ? as ? shown ? in ? the ? following ? illustrations. splice retention unit fiber ? unit retention unit fiber ? unit fiber ? unit fiber ? unit ?? ? the ? fiber ? units ? should ? be ? as ? close ? as ? possible ? when ? they ? are connected. sensing ? distance ? will ? be ? reduced ? by ? approximately ? 25% ? when ? fbers ? are ? connected. ? ?? ? only ? 2.2-mm ? dia. ? fbers ? can ? be ? connected. ?
precautions 34 fiber ? optic ? and ? laser ? optic ? amplifers simple ? fiber ? optic ? amplifers e3x-sd ? with ? digital ? display, ? e3x-na ? with ? bar ? graph ? display e3x-sd ? features streamlined ? features ? provide ? basic ? sensing ? immediately ? after ? plug-in easy ? push ? button ? teach ? with ? or ? without ? workpiece large, ? 6 ? mm ? wide ? digital ? display ? provides ? read-out ? of ? incident ? and ? operating ? level incident ? settings ? and ? management ? can ? be ? performed ? reliably ? with ? 0 ? to ? 999% ? (10 ? times) ? fn ? tune ? adjustment built-in ? off-delay, ? on-delay, ? one-shot ? timer optical ? communication ? design ? prevents ? mutual ? interference ? for ? up ? to ? 5 ? amplifers pre-wired ? (2 ? m ? cable) ? and ? wire-saving ? connector ? models ? available e3x-na ? features streamlined ? features ? provide ? basic ? sensing ? immediately ? after ? plug-in use ? the ? led ? bar ? display ? to ? quickly ? confrm ? sensor ? performance optical ? communication ? design ? prevents ? mutual ? interference ? for ? up ? to ? 5 ? amplifers green ? led ? models ? address ? mark-detecting ? applications high-speed ? models ? have ? a ? response ? time ? of ? 50 ? micro-seconds ? (s) ip66 ? water-resistant ? models ? available ? with ? m8 ? connector ? or ? pre-wired ? with ? 2 ? m ? cable ? ordering ? information amplifer ? units digital ? display ? and ? direct ? key ? setting item appearance connection ? method ratings ? and ? specifcations model npn ? output pnp ? output standard ? models pre-wired e3x-sd11 e3x-sd41 wire-saving ? connector e3x-sd6 e3x-sd8
35 bar ? display ? and ? adjuster ? setting item appearance connection ? method ratings ? and ? specifcations model npn ? output pnp ? output standard ? models pre-wired e3x-na11 e3x-na41 wire-saving ? connector e3x-na6 e3x-na8 high-speed ? detection ? models pre-wired response ? time: ? 20 ? s e3x-na11f e3x-na41f water-resistant pre-wired degree ? of ? protection: ? ip66 e3x-na11v e3x-na41v connector ? (mb) E3X-NA14V e3x-na44v specifcations type digital ? display ? and ? direct ? key ? setting bar ? display ? and ? adjuster ? setting standard ? models standard ? models high-speed ? detection ? models water-resistant ? models item model ex-sd e3x-na e3x-na f e3x-na v light ? source ? (wavelength) red ? led ? (620 ? nm) red ? led ? (680 ? nm) power ? supply ? voltage 12 ? to ? 24 ? vdc ? 10%, ? ripple ? (p-p): ? 10% ? max. current ? comsumption 960 ? mw ? max. ? (power ? supply: ? 24 ? v, ? current ? consumption: ? 40ma ? max. 35 ? ma ? max. control ? output open-collector ? output ? (npn ? or ? pnp) load ? power ? supply: ? 26.4 ? v ? max., ? load ? current: ? 50 ? ma ? max. ? (residual ? voltage: ? 1.5 ? v ? max.) ? (*1) light-on/dark-on ? mode ? selector protection ? circuits power ? supply ? reverse ? polarity ? protection, ? output ? short-circuit ? protection, ? output ? reverse ? polarity ? protection ? (*2) timer ? function on/off-delay ? timer: ? 10 ? ms ? (each ? fxed) off-delay ? timer: ? 40 ? ms ? (fxed) mutual ? interference ? prevention up ? to ? 5 ? amplifers ? (optically ? synchronized) none up ? to ? 5 ? amplifers ? (optically ? synchronized) weight ? (packed ? state) pre-wired ? model: ? approx. ? 100 ? g, ? model ? with ? connector: ? approx. ? 55 ? g ? (*3) note: ? *1. ? for ? the ? e3x-na, ? residual ? voltage ? is ? 1v ? max. ? *2. ? the ? e3x-na ? does ? not ? have ? output ? reverse ? polarity ? prevention. ? *3. ? add ? 10 ? g ? for ? water-resistant ? models. fiber ? optic ? and ? laser ? optic ? amplifers
36 e3x-da-s ? dual ? display ? digital ? fiber ? optic ? amplifer features dual ? digital ? display ? can ? monitor ? current ? and ? preset ? values, ? including ? digital, ? bar, ? percent ? and ? hold ? display ? functions power ? tuning ? function ? addresses ? saturation ? or ? insuffcient ? light ? conditions 4-element ? led ? and ? auto ? power ? control ? ensure ? stable, ? long ? term ? performance three ? inspection ? speeds/distances ? in ? one ? model: ? standard, ? high-speed ? and ? high-resolution advanced ? functions ? include ? differential ? operation ? for ? minute ? object ? detection, ? 2 ? independent ? outputs ? for ? area ? detection, ? remote ? input ? function ? and ? counter ? function advanced ? models ? available ? for ? mark ? detection; ? two-outputs ? for ? area ? output, ? self-diagnostics ? or ? differential ? operation; ? external ? input ? for ? remote ? setting optical ? communications ? ports ? built ? into ? each ? sensor ? enables ? data ? exchange ? with ? one ? another ? and ? the ? omron ? mobile ? console ? remote ? control pre-wired ? (2 ? m ? cable) ? and ? wire-saving ? connector ? models ? available ordering ? information amplifer ? units ? with ? cables item appearance functions model npn ? output pnp ? output standard ? models e3x-da11-s e3x-da41-s mark-detecting ? models green ? led e3x-dag11-s e3x-dag41-s blue ? led e3x-dab11-s e3x-dab41-s advanced models two-output ? models area ? output, ? self-diagnosis, ? differential ? operation e3x-da11tw-s e3x-da41tw-s external-input models remote ? setting, ? counter, ? differential ? operation e3x-da11rm-s e3x-da41rm-s amplifer ? units ? with ? connectors item appearance functions model npn ? output pnp ? output standard ? models e3x-da6-s e3x-da8-s mark-detecting ? models green ? led e3x-dag6-s e3x-dag8-s blue ? led e3x-dab6-s e3x-dab8-s advanced models two-output ? models area ? output, ? self-diagnosis, ? differential ? operation e3x-da6tw-s e3x-da8tw-s external-input models remote ? setting, ? counter, ? differential ? operation e3x-da6rm-s e3x-da8rm-s
37 specifcations type standard models mark-detecting ? models advanced, ? two- output ? models advanced, ? external- input ? models model npn ? output e3x-da11-s e3x-dag11-s e3x-dab11-s e3x-da11tw-s e3x-da11rm-s item pnp ? output e3x-da41-s e3x-dag41-s e3x-dab41-s e3x-da41tw-s e3x-da41rm-s light ? source ? (wavelength) red ? led ? (650 ? nm) green ? led ? (525 ? nm) blue ? led ? (470 ? nm) red ? led ? (650 ? nm) supply ? voltage 12 ? to ? 24 ? dvc ? 10%, ? ripple ? (p-p) ? 10% ? max. power ? comsumption 960 ? mw ? max. ? (current ? consumption: ? 40 ? ma ? max. ? at ? power ? supply ? voltage ? of ? 24 ? vdc) 1,080 ? mw ? max. ? (current ? consumption: ? 45 ? ma ? max. ? at ? power ? supply ? voltage ? of ? 24 ? vdc) control ? output load ? power ? supply ? voltage: ? 26.4 ? vdc; ? npn/pnp ? open ? collector; load ? current: ? 50 ? ma ? max.: ? residual ? voltage: ? 1 ? v ? max. circuit ? protection reverse ? polarity ? for ? power ? supply ? connection, ? output ? short-circuit response time high- speed mode npn 48 ? s ? for ? operation ? and ? 50 ? s ? for ? reset 80 ? s ? for ? operation ? and reset respectively 48 ? s ? for ? operation ? and ? 50 ? s ? for ? reset ? (*1) pnp 53 ? s ? for ? operation ? and ? 55 ? s ? for ? reset 53 ? s ? for ? operation ? and ? 55 ? s ? for ? reset ? (*1) standard ? mode 1 ? ms ? for ? operation ? and ? reset ? respectively high-resolution ? mode 4 ? ms ? for ? operation ? and ? reset ? respectively functions power ? tuning light ? emmission ? power ? and ? reception ? gain, ? digital ? control ? method differential ? detection switchable ? between ? single ? edge ? and ? double ? edge ? detection ? mode single ? edge: ? can ? be ? set ? to ? 250 ? s, ? 500 ? s, ? 1 ? ms, ? 10 ? ms, ? or ? 100 ? ms. double ? edge: ? can ? be ? set ? to ? 500 ? s, ? 1 ? ms, ? 2 ? ms, ? or ? 200 ? ms. timer ? function select ? from ? off-delay, ? or ? one-shot ? timer. 1 ? ms ? to ? 5 ? s ? (1 ? to ? 20 ? ms ? set ? in ? 1-ms ? increments, ? 20 ? to ? 200 ? ms ? set ? in ? 10-ms ? increments, 200 ? ms ? to ? 1 ? s ? set ? in ? 100-ms ? increments, ? and ? 1 ? to ? 5 ? s ? set ? in ? 1 ? s-increments) automatic ? power ? control ? (apc) high-speed ? control ? method ? for ? emission ? current zero-reset display ? can ? be ? reset ? to ? zero ? when ? required ? (negative ? values ? can ? be ? displayed). initial ? reset settings ? can ? be ? returned ? to ? defaults ? as ? required. mutual ? interference ? prevention possible ? for ? up ? to ? 10 ? units. (*2, ? *3) counter switchable ? between ? up counter and down counter. set count: 0 to 9,999,999 i/o ? settings output ? setting ? (select ? from ? channel ? 2 ? out-put, ? area ? output, ? or ? self- diagnosis.) external ? input ? setting ? (select ? from ? teaching, ? power ? tuning, ? zero ? reset, ? light ? off, ? or ? counter reset.) weight ? (packed ? state) approx. ? 100 ? g note: ? *1. ?? when ? counter ? is ? enabled: ? 80 ? s ? for ? operation ? and ? resety ? respectively. ? *2. ?? communications ? are ? disabled ? if ? the ? detection ? mode ? is ? selected ? during ? high-speed ? mode; ? the ? communications ? functions ? for ? mutual ? interference ? prevention ? and ? the ? mobile ? console ? will ? not ? function. ? *3. ?? mutual ? interference ? prevention ? can ? be ? used ? for ? up ? to ? 6 ? units ? if ? power ? tuning ? is ? enabled. fiber ? optic ? and ? laser ? optic ? amplifers
38 e3x-mda ? two-channel ? dual ? display ? digital ? amplifer features two ? independent ? fber-optic ? amplifers ? in ? a ? slim, ? 10 ? mm ? wide ? track-mount ? unit designed ? for ? gang ? mounting ? up ? to ? 18 ? sensors ? (9 ? units) dual ? digital ? display ? can ? monitor ? current ? and ? preset ? values, ? including ? digital, ? bar, ? percent ? and ? hold ? display ? functions three ? inspection ? speeds/distances ? in ? one ? model: ? standard, ? high-speed ? and ? high-resolution logical ? and/or ? control ? output ? for ? local ? control ? in ? high-speed ? applications 4-element ? led ? and ? auto ? power ? control ? ensure ? stable, ? long ? term ? performance optical ? communications ? ports ? built ? into ? each ? sensor ? enables ? data ? exchange ? with ? one ? another ? and ? the ? omron ? mobile ? console ? remote ? control pre-wired ? (2 ? m ? cable) ? and ? wire-saving ? connector ? models ? available ordering ? information dual ? amplifers sensing ? heads setup features light ? source connection ? method model npn ? output pnp ? output order ? e32 ? fber-optic cables separately and/or ? logic ? output 3 ? sensing ? speeds red ? (650 ? nm) pre-wired e3x-mda11 e3x-mda41 one ? master ? connector ? for ? ganged ? units connector e3x-mda6 e3x-mda8
39 specifcations type 2-channel ? models model npn ? output e3x-mda11 e3x-mda6 item pnp ? output e3x-mda41 e3x-mda8 light ? source ? (wavelength) red ? led ? (650 ? nm) supply ? voltage 12 ? to ? 24 ? dvc ? 10%, ? ripple ? (p-p) ? 10% ? max. power ? comsumption 1,080 ? mw ? max. ? (current ? consumption: ? 45 ? ma ? max. ? at ? power ? supply ? voltage ? of ? 24 ? vdc) control ? output load ? power ? supply ? voltage: ? 26.4 ? vdc; ? npn/pnp ? open ? collector; load ? current: ? 50 ? ma ? max.: ? residual ? voltage: ? 1 ? v ? max. circuit ? protection reverse ? polarity ? for ? power ? supply ? connection, ? output ? short-circuit response time high- speed mode npn 130 ? s (*1) ? for ? operation ? and ? reset ? respectively pnp standard ? mode 1 ? ms ? for ? operation ? and ? reset ? respectively high-resolution ? mode 4 ? ms ? for ? operation ? and ? reset ? respectively functions power ? tuning light ? emmission ? power ? and ? reception ? gain, ? digital ? control ? method timer ? function select ? from ? off-delay, ? or ? on-delay, ? one-shot ? timer. 1 ? ms ? to ? 5 ? s ? (1 ? to ? 20 ? ms ? set ? in ? 1-ms ? increments, ? 20 ? to ? 200 ? ms ? set ? in ? 10-ms ? increments, 200 ? ms ? to ? 1 ? s ? set ? in ? 100-ms ? increments, ? and ? 1 ? to ? 5 ? s ? set ? in ? 1 ? s-increments) automatic ? power ? control ? (apc) high-speed ? control ? method ? for ? emission ? current zero-reset display ? can ? be ? reset ? to ? zero ? when ? required ? (negative ? values ? can ? be ? displayed). initial ? reset settings ? can ? be ? returned ? to ? defaults ? as ? required. mutual ? interference ? prevention possible ? for ? up ? to ? 9 ? units ? (18 ? channels) (*2, ? *3) i/o ? settings output ? setting ? (select ? from ? channel ? 2 ? output, ? and, ? or, ? leading ? edge ? sync, ? falling ? edge ? sync, ? or ? differential ? output) weight ? (packed ? state) approx. ? 100 ? g approx. ? 55 ? g note: ? *1. ?? when ? differential ? output ? is ? selected ? for ? the ? output ? setting, ? the ? second ? channel ? output ? is ? 200 ? s ? for ? the ? operation ? and ? reset ? respectively. ? *2. ?? communications ? are ? disabled ? if ? the ? detection ? mode ? is ? selected ? during ? high-speed ? mode; ? the ? communications ? functions ? for ? mutual ? interference ? prevention ? and ? the ? mobile ? console ? will ? not ? function. ? *3. ?? mutual ? interference ? prevention ? can ? be ? used ? for ? up ? to ? 5 ? units ? (10 ? channels) ? if ? power ? tuning ? is ? enabled. fiber ? optic ? and ? laser ? optic ? amplifers
40 e3x-dac-s ? true ? color ? fiber ? optic ? amplifers ? with ? digital ? dual ? display features reliability ? through ? precise ? and ? true ? color ? detection ? with ? white ? led ? emitter ? and ? rgb ? (red, ? green ? and ? blue) ? processing enhanced ? stability: ? workpiece ? movement ? does ? not ? affect ? the ? sensor ? as ? the ? receiver ? element ? processes ? light ? as ? a ? ratio ? to ? compensate ? for ? intensity ? variations easy ? push ? button ? setup ? guides ? the ? user ? to ? place ? the ? workpiece ? in ? an ? appropriate ? position ? for ? teaching full-functional, ? dual ? digital ? display ? can ? monitor ? current ? preset ? values, ? including ? digital, ? bar, ? percent ? and ? hold ? display ? functions on-board ? timing ? function ? incorporating ? off-delay, ? on-delay, ? and ? one-shot ? timing ? functions advanced ? models ? offer ? remote ? control ? as ? well ? as ? twin ? sensing ? and ? output ? to ? simultaneously ? distinguish ? between ? two ? registered ? colors pre-wired ? (2 ? m ? cable) ? and ? wire-saving ? connector ? models ? available ordering ? information amplifer ? units amplifer ? units ? with ? cables item appearance functions model npn ? output pnp ? output standard ? models timer, ? response ? speed ? change e3x-dac11-s e3x-dac41-s advanced ? models standard ? models ? + ? simultaneous ? determination ? (2 ? colors) and/or ? output, ? remote ? setting e3x-dac21-s e3x-dac51-s amplifer ? units ? with ? connectors ? (amplifer ? unit ? connectors ? must ? be ? purchased ? separately.) item appearance functions model npn ? output pnp ? output standard ? models timer, ? response ? speed ? change e3x-dac6-s e3x-dac8-s
41 specifcations type standard ? models advanced ? models item model e3x-dac -s ( : 11/41/6/8) e3x-dac -s ( : 21/51) light ? source ? (wavelength) white ? led ? (420 ? to ? 700 ? nm) sensing ? method c ? mode: ? rgb ? ratio ? determination ? (or ? i ? mode: ? light ? intensity ? determination ? for ? red, ? green, ? or ? blue) (*1) number ? of ? registered ? colors 1 2 ? (simultaneous ? determination) power ? supply ? voltage 12 ? to ? 24 ? dvc ? 10%, ? ripple ? (p-p) ? 10% ? max. power ? comsumption 960 ? mw ? max. ? (current ? consumption: ? 40 ? ma ? max. ? at ? power ? supply ? voltage ? of ? 24 ? vdc) control ? output npn ? or ? pnp ? open ? collector load ? power ? supply ? voltage: ? 26.4 ? vdc ? max. load ? current: ? 50 ? ma ? max. ? (residual ? voltage: ? 2 ? v ? max.) remote ? control ? input no-voltage ? input ? (contact/transistor) protection ? circuits reverse ? polarity ? for ? power ? supply ? connection, ? output ? short-circuit, ? reversed ? output ? polarity ? protection response time super-high-speed ? mode (*2) operate ? or ? reset: ? 60 ? s operate ? or ? reset: ? 120 ? s high-speed ? mode operate ? or ? reset: ? 300 ? s operate ? or ? reset: ? 600 ? s standard ? mode operate ? or ? reset: ? 1 ? ms operate ? or ? reset: ? 2 ? ms high-resolution ? mode operate ? or ? reset: ? 4 ? ms operate ? or ? reset: ? 8 ? ms functions operating ? mode on ? for ? match ? (on ? for ? same ? color ? as ? registered ? color) ? or on ? for ? mismatched ? (on ? for ? different ? color ? from ? registered ? color) timer ? function timer ? type: ? off ? delay, ? on ? delay, ? or ? one-short timer ? range: ? 1 ? ms ? to ? 5 ? s ? (variable) control ? outputs output ? for ? each ? channel, ? and ? output, ? and ? or ? output remote ? control one-point ? teaching, ? teaching ? with/without ? workpiece, ? zero ? reset, ? and ? light ? emission ? off display ? switch (*3) seven ? patterns ? total: ? match ? + ? threshold ? + ? margin ? + ? threshold, ? analog ? bar ? display, ? peak ? + ? bottom, ? etc. initialization initial ? reset ? (factory ? defaults) ? or ? user ? reset ? (saved ? settings) weight ? (packed ? state) pre-wired ? model: ? approx. ? 100g, ? amplifer ? unit ? connector ? model: ? approx. ? 55 ? g note: ? *1. ?? when ? teaching ? with/without ? a ? workpiece, ? the ? best ? sensing ? method ? will ? be ? automatically ? selected ? (rgb ? ratio ? (c ? mode) ? or ? light ? intensity ? determination ? (i ? model)). ? if ? color ? differences ? are ? not ? strong ? enough ? and ? rgb ? ratios ? would ? result ? in ? unstable ? detection, ? then ? light ? intensity ? determination ? (i ? mode) ? will ? be ? selected. ? *2. ? mutual ? interference ? prevention ? cannot ? be ? used ? in ? super-high-speed ? mode, ? and ? light ? intensity ? determination ? (i ? mode) ? must ? be ? used. ? *3. ? with ? light ? intensity ? determination ? (i ? mode), ? the ? correlation ? is ? not ? displayed, ? but ? rather ? the ? light ? intensity ? is ? displayed. fiber ? optic ? and ? laser ? optic ? amplifers
42 fiber ? optic ? and ? laser ? optic ? amplifer ? accessories wire-saving ? connector ? models streamlines ? installation ? and ? maintenance ? to ? reduce ? service ? time unique ? connector ? design ? reduces ? wiring ? and ? space ? requirement ? because ? one ? master ? connector ? supplies ? power ? to ? all ? other ? slave ? connectors detach ? the ? sensor ? without ? disturbing ? the ? fber ? installation ? or ? output ? wiring ? for ? servicing connectors description appearance compatible ? amplifers cable ? length conductors model master connector (for ? frst ? unit) e3x-da6-s, ? e3x-da8-s, ? e3x-dag6-s, ? e3x-dag8-s, ? e3x-dab6-s, ? e3x-dab8-s, ? e3x-dac6-s, ? e3x-dac8-s, ? e3x-na6, ? e3x-na8, ? e3x-sd6, ? e3x-sd8 2 ? m 3 e3x-cn11 e3x-da6tw-s, ? e3x-da8tw-s, ? e3x-da6rm-s, ? e3x-da8rm-s, ? e3x-mda6, ? e3x-mda8, ? e3c-lda6, ? e3c-lda7, ? e3c-lda8, ? e3c-lda9 2 ? m 4 e3x-cn21 slave connector (for ? second ? and additional units) e3x-da6-s, ? e3x-da8-s, ? e3x-dag6-s, ? e3x-dag8-s, ? e3x-dab6-s, ? e3x-dab8-s, ? e3x-dac6-s, ? e3x-dac8-s, ? e3x-na6, ? e3x-na8, ? e3x-sd6, ? e3x-sd8 2 ? m 1 e3x-cn12 e3x-da6tw-s, ? e3x-da8tw-s, ? e3x-da6rm-s, ? e3x-da8rm-s, ? e3x-mda6, ? e3x-mda8, ? e3c-lda6, ? e3c-lda7, ? e3c-lda8, ? e3c-lda9 2 ? m 2 e3x-cn22 m8 ? connectors use ? these ? connectors ? with ? water-resistant ? E3X-NA14V ? and ? e3x-na44v ? amplifers ? only. size cable ? specifcations appearance cable ? type model m8 standard cable straight ? connector 2m four- conductor cable xs3f-m421-402-a 5m xs3f-m421-405-a l-shaped ? connector 2m xs3f-m422-402-a 5m xs3f-m422-405-a pre-wired models require ? three ? wiring ? connections ? for ? each ? sensor. shown: 15 wires plus extension connector wires. the ? e3x-da-s ? requires ? three ? wiring ? connections ? for ? the ? master ? sensor ? only. ? each ? additional ? sensor ? in ? a ? group ? requires ? only ? one ? wiring ? connection. shown: only 7 wires ? with ? no ? additional ? extension ? connectors.
43 mounting ? bracket ? and ? track description appearance dimensions ? h ? x ? w ? x ? d ? mm specifcation model surface ? mounting ? bracket 7.3 ? h ? x ? 35 ? w ? x ? 12 ? d 304 stainless steel; fts ? the ? din ? track ? holder e39-l143 mounting ? track 500 ? l ? x ? 35 ? h ? x ? 7.3 ? d 0.5 ? m ? length pfp-50n 1000 ? l ? x ? 35 ? h ? x ? 7.3 ? d 1 ? m ? length pfp-100n 1000 ? l ? x ? 35 ? h ? x ? 16.0 ? d 1 ? m ? length pfp-100n2 end plate 50 x 10 x 10 holds ? track-mounted ? devices in place pfp-m mobile ? console program ? and ? monitor ? the ? following ? amplifers ? remotely ? with ? mobile ? console: ? e3x-da-s, ? e3x-mda, ? e3c-lda console ? includes ? 1.5 ? m ? cable ? for ? remote ? setup ? connection ? to ? the ? programming ? head programming ? head ? track ? mounts ? fush ? against ? leftmost ? amplifer ac ? adapter ? powers ? console description appearance/ ? dimensions model mobile console kit includes ? console, ? programming ? head, ? cable ? and ? ac ? adapter e3x-mc11-sv2 mobile ? console ? (only) 136 ? h ? x ? 52.8 ? w ? x ? 22 ? d ? mm e3x-mc11-c1-sv2 programming ? head ? (only) mounts ? on ? din ? rail 51.3 ? h ? x ? 20 ? w ? x ? 30.3 ? d ? mm e3x-mc11-h1 cable 1.5 ? m ? length e3x-z12-1
44 fiber ? optic ? or ? laser ? optic ? sensor ? communication ? unit ? supports multi-vendor networks on/off ? signals ? and ? incident ? light ? levels ? can ? be ? sent ? to ? the ? host plc ? without ? any ? need ? for ? programming ? (using ? the ? remote ? i/o ? communications ? slave ? function). threshold ? values ? and ? function ? settings ? can ? be ? read, ? written, ? or ? taught ? (using ? the ? message ? communications ? function). device ? parameters ? prepared ? on ? a ? personal ? computer ? connected ? to ? the ? network ? can ? be ? downloaded ? in ? a ? batch ? operation ? (using ? the ? confgurator). plc configurato r download a group of parameters for devices (sensors, te mperature controllers, etc., supporting devicenet) that you have prepared on your personal computer in a single batch . monitor operating hours. the operating hours for sensors can be stored in internal memory and used for planning maintenance and other applications . up to 16 channels can be connected. supports a wide range of sensors. the unit supports a variety of digital sensors, including fiber sensors, laser sensors, and proximity sensors. mobile consol e a built-in interface for a mobile console lets you bring setting and confirmation operations to your fingertips . optical communications fiber ? optic ? and ? laser ? optic ? amplifer ? accessories fiber amplifier?sensor communication?unit e3x-dr t21- s pl c devicenet ? model
45 ordering ? information fiber ? amplifer ? sensor ? communication ? unit wire-reducing ? connector type model type model devicenet ex-drt21-s cordless ? slave ? connector e3x-cn02 ratings ? and ? specifcations item description communications ? methods devicenet ? communications communications ? functions remote ? i/o ? communications ? slave ? function monitors ? on/off ? output, ? status, ? incident ? light ? level ? (digital ? display ? data) message ? communications ? functions sets ? parameters ? using ? explicit ? messages confgurator edits ? slave ? devices ? parameters, ? enables ? device ? monitor ? functions mobile ? console ? connection e3x-mc11-s-v2 ? can ? be ? connected power ? supply supplied ? from ? the ? devicenet ? communications ? connecto r (power ? is ? also ? supplied ? to ? all ? connected ? sensors ? through ? wire-reducing ? connectors) maximum ? connectable ? sensors 13 ? or ? 16 ? (depending ? on ? the ? operation ? mode) connectable ? sensors e3x-da-s ? series ? or ? e3x-mda ? series ? digital ? fiber ? sensor e3c-lda ? series ? laser ? photoelectric ? sensor ? with ? separate ? digital ? amplifer e2c-eda ? high-resolution ? digital ? proximity ? sensor ? with ? separate ? amplifer (use ? connector-type ? amplifer ? units ? and ? the ? e3x-cn02 ? cordless ? slave ? connector) power ? supply ? voltage 11 ? to ? 25 ? vdc current ? comsumption ? (see ? note.) 70 ? ma ? max. ambient ? operating ? temperature C20 ? to ? 55c ambient ? operating ? humidity 35% ? to ? 85% ? (with ? no ? condensation) storage ? temperature C30 ? to ? 70c dimensions ? (mm) 30 ? x ? 34.6 ? x ? 71.3 ? (w ? x ? h ? x ? d) weight ? (packed ? state) approx. ? 150 ? g note: ? this ? does ? not ? include ? the ? current ? supplied ? to ? the ? sensor.
46 dimensions ? (unit: ? mm) fiber ? optic ? amplifers amplifer ? units ? with ? cables e3x-sd11 e3x-sd41 e3x-na11 e3x-na11f e3x-na41 e3x-na41f amplifer ? units ? with ? connectors e3x-sd6 e3x-sd8 e3x-na6 e3x-na8 8 10.7 10 3 64.3 38.6 31.5 9.9 5.3 3.4 22.4 4.4 4.1 13 34.8 2.4 22.4 16 4 10.75 16 16 4.4 3.4 tw o, 2.4 dia. tw o, 3.2-dia. holes mounting brac ke t (e39-l143) (order separ ately) stainless steel (sus304) a *1 mounting holes tw o, m3 operation indicator *1. the mounting brac ke t can also be used on side a. *2. there is no hole f or e3x-na@f models . 4-dia. vin yl-insulated round cab le with 3 conductors* (conductor cross section: 0.2 mm 2 ; insulator diameter : 1.1 mm), standard length: 2 m. hole f or optical communications *2 with mounting bracket attached dimensions with master connector connected dimensions with slave connector connected 10 64.3 3 8 10.7 9.9 3.4 38.6 13 3.9 5.1 1.7 4.2 6.2 1.7 36.7 14 31.5 5.5 1.8 1.8 tw o, 2.4 dia. operation indicator hole f or optical comm unications (f or pre ve nting mutual interf erence) 1.5 31.5 1.8 5.1 3.9 12.95 4 10 64.3 67.5 71 e3x-cn11: 4.0 dia. 64.3 67.5 71 1.5 31.5 1.8 5.1 3.9 3 4.8 12.95 e3x-cn12: 2.6 dia. 11.55 17.45 4 10
47 amplifer ? units ? with ? connectors, water-resistant ? models E3X-NA14V e3x-na44v amplifer ? units ? with ? cables, ? water-resistant ? models e3x-na11v e3x-na41v 9.2 28.65 25.95 12 8 10.7 4.3 9.9 3.4 3.9 33 23.9 14.4 11.5 67.2 37 16 16 23.9 6.6 11.2 2.8 40 5.4 5.4 3.4 3.4 16 6.9 81.5 a *1 tw o, 2.4 dia. mounting brac ke t (e39-l148) (order separ ately) stainless steel (sus304) *2 tw o, m3 mounting holes operation indicator incident le ve l indicators hole f or optical communi - cations *1. the mounting br ac k et can also be used on side a. *2. 4-dia. vin yl-insulated round cab le with 3 conductors (conductor cross section: 0.45 mm 2 , insulator diameter : 1.1 mm), standard length: 2 m. 12 8 10.7 4.3 9.9 3.4 3.9 33 23.9 14.4 11.5 67.2 37 16 16 23.9 11 11.2 2.8 m8 40 5.4 5.4 3.4 3.4 16 9.2 28.65 25.95 81.5 a* tw o, 2.4 dia. tw o, m3 operation indicator incident le ve l indicators mounting brac ke t (e39-l148) (order separ ately) stainless steel (sus304) mounting holes 6.9 * the mounting brac ke t can also be used on this side a. hole f or optical communi - cations with mounting bracket attached with mounting bracket attached
48 dimensions ? (unit: ? mm) amplifer ? units ? with ? cables e3x-da11-s e3x-da41-s e3x-dac11-s e3x-dac21-s e3x-dac41-s e3x-dac51-s e3x-dag11-s e3x-dag41-s e3x-dab11-s e3x-dab41-s e3x-da11rm-s e3x-da41rm-s e3x-da11tw-s e3x-da41tw-s e3x-mda11 e3x-mda41 main display sub-dislay vinyl-insulated round cable standard length: 2 m* round ( ): power tuning indicator oblong ( ): operation indicator for channel 2 3.4 10 two, 2.4 dia. 4.5 5.65 3.93 =11.7 12.15 15.1 32.8 3.25 29.8 3.93=11.7 4.3 70 32 12.5 9.9 16 3.4 4.4 34.8 28.1 16 28.1 16 18.7 44.3 two, m3 e3x-da11-s e3x-da41-s e3x-dag11-s e3x-dag41-s e3x-dab11-s e3x-dab41-s e3x-da11rm-s e3x-da41rm-s e3x-da11tw-s e3x-da41tw-s operation indicator with mounting bracket attached the mounting bracket can also be used on this side. hole for optical communications mounting bracket (e39-l143) sus304 stainless steel two, 3.2 dia. holes mounting holes *cable specifications a 4-dia., 4-conductor (conductor cross-sectional area: 0.2 mm 2 ; insulation diameter: 1.1 mm) e3x-da11-s/da41-s/dag11-s/ dag41-s/dab11-s/dab41- s e3x-da11tw-s/da41tw-s/ da11rm-s/da41rm- s a 4-dia., 3-conductor (conductor cross-sectional area: 0.2 mm 2 ; insulation diameter: 1.1 mm) cable specifcations e3x-da11-s/da41-s/dag11-s/ dag41-s/dab11-s/dab41-s/ dac11-s/dac41-s a ? 4-dia., ? 3-conductor ? (conductor ? cross-sectional area: ? 0.2 ? mm 2 ; ? insulation ? diameter: ? 1.1 ? mm) e3x-da11tw-s/da41tw-s/ da11rm-s/da41rm-s a ? 4-dia., ? 4-conductor ? (conductor ? cross-sectional area: ? 0.2 ? mm 2 ; ? insulation ? diameter: ? 1.1 ? mm) e3x-mda11/-mda41 a ? 4-dia., ? 2-conductor ? (conductor ? cross-sectional ? area: ? 0.2 ? mm 2 ; ? insulation ? diameter; ? 1.1 ? mm) e3x-dac21-s/-dac51-s a ? 4-dia., ? 5-conductor ? (conductor ? cross-sectional ? area: ? 0.2 ? mm 2 ; ? insulation ? diameter; ? 1.1 ? mm) main display sub-dislay vinyl-insulated round cable standard length: 2 m* round ( ): power tuning indicator oblong ( ): operation indicator for channel 2 3.4 10 two, 2.4 dia. 4.5 5.65 3.93 =11.7 12.15 15.1 32.8 3.25 29.8 3.93=11.7 4.3 70 32 12.5 9.9 16 3.4 4.4 34.8 28.1 16 28.1 16 18.7 44.3 two, m3 e3x-da11-s e3x-da41-s e3x-dag11-s e3x-dag41-s e3x-dab11-s e3x-dab41-s e3x-da11rm-s e3x-da41rm-s e3x-da11tw-s e3x-da41tw-s operation indicator with mounting bracket attached the mounting bracket can also be used on this side. hole for optical communications mounting bracket (e39-l143) sus304 stainless steel two, 3.2 dia. holes mounting holes *cable specifications a 4-dia., 4-conductor (conductor cross-sectional area: 0.2 mm 2 ; insulation diameter: 1.1 mm) e3x-da11-s/da41-s/dag11-s/ dag41-s/dab11-s/dab41- s e3x-da11tw-s/da41tw-s/ da11rm-s/da41rm- s a 4-dia., 3-conductor (conductor cross-sectional area: 0.2 mm 2 ; insulation diameter: 1.1 mm) sub-display
49 amplifer ? units ? with ? connectors e3x-da6-s e3x-da8-s e3x-dac6-s e3x-dac8-s e3x-dag6-s e3x-dag8-s e3x-dab6-s e3x-dab8-s e3x-da6rm-s e3x-da8rm-s e3x-da6tw-s e3x-da8tw-s 3.4 3.93 =11.75 12.15 15.1 32.8 3.25 29.8 3.93=11.7 4.3 70 8.1 32 12.95 9.9 16 34.8 28.1 18.7 44.3 3.4 4.4 16 two, m3 10 two, 2.4 dia. 4.5 5.65 connector dia. a *2 16 28.1 e3x-da6-s e3x-da8-s e3x-dag6-s e3x-dag8-s e3x-dab6-s e3x-dab8-s e3x-da6rm-s e3x-da8rm-s e3x-da6tw-s e3x-da8tw-s with mounting bracket attached hole for optical communications mounting bracket (e39-l143) sus304 stainless steel two, 3.2 dia. holes mounting holes *1 the mounting bracket can also be used on this side. *2 cable diameter s main display sub-dislay round ( ): power tuning indicator oblong ( ): operation indicator for channel 2 operation indicator a *1 e3x-cn11 (3 conductors) e3x-cn21 (4 conductors) e3x-cn22 (2 conductors) 4.0-mm dia. e3x-cn12 (1 conductor) 2.6-mm dia.
50 dimensions ? (unit: ? mm) master ? connectors e3x-cn11 e3x-cn21 slave ? connectors e3x-cn12 e3x-cn22 mounting ? brackets e39-l143 end ? plates pfp-m 14.4 2.6 6 2.9 10 0.8 8.4 6.8 10.7 50 +5 0 30 2 4 dia. 10 2 4 15.1 6 2,000 +50 0 *e3x-cn11: 2.6-dia. vin yl-insulated round cab le with 3 conductors (conductor cross section: 0.2 mm 2 , insulator diameter : 1.1 mm) * 14.4 2.6 3 6 2.9 10 0.8 8.4 6.8 10.7 2,000 +50 0 50 +5 0 30 2 e3x-cn12: 2.6 dia. e3x-cn22: 4 dia. 10 2 4 15.1 6 * *e3x-cn12: 2.6-dia. vin yl-insulated round cab le with 1 conductor (conductor cross section: 0.2 mm 2 , insulator diameter : 1.1 mm) f our , r1.7 7 3.4 1 3 16 3 10 max. 7 10.3 7.3 5.3 (10.3) 2.5 34.8 22 16 26.8 3 tw o, 3.2 dia. 3.4 1 tw o, m3 16 0.1 mounting holes *e3c-cn11: ?? a ? 4-dia., ? 3-conductor, ? vinyl-insulated ? round ? cable ? (conductor ? cross-sectional ? area: ? 0.2 ? mm 2 ; ? insulation ? diameter: ? 1.1 ? mm) ? is ? used. *e3c-cn21: ?? a ? 4-dia., ? 4-conductor, ? vinyl-insulated ? round ? cable ? (conductor ? cross-sectional ? area: ? 0.2 ? mm 2 ; ? insulation ? diameter: ? 1.1 ? mm) ? is ? used. *e3c-cn12: ?? a ? 2.6-dia.,single-conductor, ? vinyl-insulated ? round ? cable ? (conductor ? cross-sectional ? area: ? 0.2 ? mm 2 ; ? insulation ? diameter: ? 1.1 ? mm) ? is used. *e3c-cn22: ?? a ? 4-dia., ? 2-conductor, ? vinyl-insulated ? round ? cable ? (conductor ? cross-sectional ? area: ? 0.2 ? mm 2 ; ? insulation ? diameter: ? 1.1 ? mm) ? is ? used. material: stainless steel (sus304) 50 11.5 10 m4 8 panhead scre w m4 spr ing wa sher 4.8 1.3 1.8 1.8 1 6.2 10 35.5 35.3
51 136 50 52.8 22 optical communications connection indicator sensor operation indicator main display sub-display right key esc/pwr key operation keys ent key left key up key down key 20 28.8 13.2 31.2 9.9 27.7 17.3 1.2 5.1 12.3 36.7 51.3 5.6 24.3 30.3 31.8 16.3 13.1 (38.2) 10 ac adapter jack communications jack menu indicators channel indicator m5 ball plunger battery indicators channel buttons optical communi - cations positio n communications jack e3x-mc11-s mobile console mobile console head mobile ? console ? e3x-mc11-sv2 devicenet ? communication ? unit ? e3x-drt21-s 30 34. 8 (75) 16 (106) 71. 3 (65) 34. 6
omron ele c tronics ll c ? the americas headquarters schaumburg, il usa ? 847.843.7900 ? 800.556.6766 ? www.omron247.com o mron canada, inc. ? head office toronto, on, canada ? 416.286.6465 ? 866.986.6766 ? www.omron.ca omron eletr?nica do brasil ltda ? head office s ?o p aulo, sp, brasil ? 55 . 11. 2101. 63 00 ? www.omron.com.br o mron electronics mexico sa de cv ? head office apodaca, n.l. ? 52.811.156.99.10 ? 001.800.556.6766 ? mela@omron.com o mron argentina ? sales office cono sur ? 54.11.4783.5300 o mron chile ? sales office santiago 56.9.9917.3920 o ther omron latin america sales 54.11.4783.5300 printed on recycled paper . note: specifcations are subject to change. ? 2008 omron electronics llc printed in u.s.a. me52i_harsh environ 9/09

▲Up To Search▲

Price & Availability of E3X-NA14V

	To Download E3X-NA14V Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .